Kenwood CD-2280M CD Player User Manual


 
CD-2280M/DPF-J9010 (En)
4
Introduction
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped
to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier
for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.
Keep this manual handy for future reference.
Audio cord ....................... (2)
System control cord ........ (1)
Remote control unit ........ (1)
Batteries (R6/AA) ............ (2)
Accessories
Communication cord ....... (1)
Types of discs playable on this unit
÷With CD-G (CD Graphics) discs, this unit can play only the audio part.
÷An 8 cm CD cannot be played back.
Disc Type Disc Size
CD (ordinary Compact Disc) 12 cm
Audio part of CDV (CD with video) 12 cm
Important items
About the DTS multi-channel audio format
The DTS multi-channel audio format is available on CD, LD and
DVD software. DTS is a strictly digital format and can not be
decoded inside most CD, LD or DVD players. For this reason, if
you attempt to listen to DTS encoded software through the ana-
log output of your new CD player, you will experience digital
noise. This noise can be quite loud if the analog output is con-
nected directly to a high power amplification system. Proper
precautions should be taken to avoid this situation. To enjoy
DTS Digital Surround playback, an external 5.1 channel DTS Digi-
tal Surround decoder system must be connected to the digital
output (S/PDIF, AES/EBU, or TosLink) of the CD player.
“Registration of DTS discs“ ª