Kenwood CD-2280M CD Player User Manual


 
19
CD-2280M/DPF-J9010 (En)
: Keys and controls used in the operations described on this page.
Programming tracks in desired order (PGM mode) (Mechanism-A only)
RANDOM
RANDOM
><<><E<10>2><>
RANDOM
DISC SKIP 5
7
6
CHARACTER/SEARCH
DOWN UP
Use the following procedure to activate random playback
which selects a track at random after every track. This fea-
ture may allow you to play CDs for long hours without
getting tired of.
Preparation
÷Load discs into the carousel. 0
÷Select the Mechanism-A or Mechanism-B.
!
Playback in a random order
(RANDOM mode)
1
Check that the Mechanism is in the normal play
TRACK mode.
#
2
Select discs.
To select one disc
2Start playback.
Previous disc Next disc
Within 8 seconds!
1Select the disc number.
3Select “ONE DISC RANDOM”.
To select all discs
Select “ALL DISC RANDOM”.
÷The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
Each press switches the modes as follows:
1 ONE DISC RANDOM
2 ALL DISC RANDOM
3 RANDOM OFF
The number here changes.
÷Each time a track ends, the same operation as above is repeated,
and the track selected next is played.
÷Random play stops after all of the tunes have been played once.
÷The random playback can also be repeated by pressing the REPEAT
key.
To select another track in the middle of playing one To cancel random playback
÷Pressing the 4 key once returns to the beginning of the track being
played.
÷Press the 7 key to stop playback.
÷Normal playback will be performed when RANDOM OFF is selected.
or
Select “RANDOM OFF”.
For random music type §
RANDOM
÷If the selected disc is being played on the other mechanism, blinking
DISCXXX BUSY!“ is displayed and the disc will not be played.
÷ONE DISC RANDOM“ cannot be selected during the continuous play
mode.
÷If a track to be played is located in the disc played on the other
mechanism, that track will be skipped. (This track will not be selected
later unless the REPEAT mode is set.)
For continuous playback (ALL DISC RANDOM only)
Press the CONTINUOUS PLAY key.
Note
Note
If it is Mechanism-B that is selected, use the main unit keys for these operations.