Filter
Top Products
21
CD-2280M/DPF-J9010 (En)
: Keys and controls used in the operations described on this page.
Registration of Title Name
ITLTIETSRO!EO!M
DD SI CCERDANI3G
÷The characters also can be selected with the DISC SKIP knob on the
main unit (provided that the OPERATION-A indicator is lit). Turn the
knob until the character to be entered comes to the position of the
flashing cursor.
In regard to disc information reading
The entered title name is read in to the disc with the
following timing.
÷When the door panel is closed.
÷With closed door panel, when title name mode is cancelled (except
during the continuous play mode).
÷One character is set and the cursor goes to the next digit.
÷Input the entire track title by repeating 2 and 3 for each character.
DISPLAY-A : The display flashes.
Do not move or exchange discs until the disc information
has been read in.
To exit title name mode
Press the MODE key.
When there are discs for which the disc information already has been
read in, there may be no display.
CAZB
=
>
Flashing cursor
1. For discs corresponding to CD-TEXT, a new title name can not be registered.
2. As the entered title names and the CD-TEXT title information are memorized, the information may be displayed even when a disc has been
removed.
Notes
Notes
0D10TC70
DISPLAY-A
1. Select the disc number.
2. Select the track number.
3. Press the SET key.
SET
CHARACTER/SEARCH
DOWN UP
4¢
2Select a character.
Press until the character to be entered
comes to the position of the flashing
cursor.
3Press the SET key.
To enter the track title
1Select the track number.
∞ DISC SKIP 5
CHARACTER/SEARCH
DOWN UP
4¢
SET
4Store the track title.
ENTER
÷Up to 20 track titles can be registered per disc by repeating steps from
1-2 to 4 for each.