Kenwood CD-2280M CD Player User Manual


 
17
CD-2280M/DPF-J9010 (En)
: Keys and controls used in the operations described on this page.
Programming tracks in desired order (PGM mode) (Mechanism-A only)
SPACE/
CHECK
CHARACTER/
P.MODE
SPACE/
CHECK
GP0ME1DD02D00T3
GP0ME1DD02D00T3
DELETE/
CLEAR
To check the programmed tracks
÷Each time the key is pressed, the program No. (P-NO) and the disc No.
are displayed.
÷The previous display resumes in a few seconds.
To add a track to the program
1Set the Mechanism-A to stop mode.
2Perform steps 2 and 3 of “Program-
ming tracks in desired order”.
^
To change a track in the program
1Set the Mechanism-A to stop mode.
2Press the CHECK key.
3Perform steps 2 and 3 of “Program-
ming tracks in desired order”.
^
÷When a track No. is entered, the track will be added to the end of the
existing program.
÷Press the CHECK key repeatedly until the track No, to be changed is
displayed.
÷Press it while the “PGM01” indicator blinks.
÷The track being played cannot be changed.
Example
To clear tracks from the program
To clear tracks from the end To clear all tracks
÷When the P.MODE key is pressed during playback, playback in order of
tracks starts from the track being played.
÷Each time the key is pressed, the last track in the program is cleared.
÷The tracks which are programmed earlier than the track being played
cannot be cleared.
DISPLAY-A
DISPLAY-A