Filter
Top Products
11
CD-2280M/DPF-J9010 (En)
: Keys and controls used in the operations described on this page.
Preparation
Notes
Notes
MODE
SET
∞ DISC SKIP 5
LAL ADATRAE3D
DD SI CCERDANI3G
0D10:: DCTAXE3T
Disc replacement
Discs can be replaced with the same procedure as “Loading discs
in the carousel”. In stopped condition, all discs can be exchanged.
However, when the door panel is opened while “DISC DETEC-
TION” is being displayed, it may not be possible to remove the
disc which had been played. Accordingly, wait for the “DISC
DETECTION” indication to go out before opening the door panel.
When the disc information has been read in at the time of regis-
tration of disc information like title name, music type, etc., the
disc information can be recalled even when the disc insertion
place is changed.
)¢
In regard to ALL DATA READ mode
(Mechanism-A only)
The disc information for all discs will be read. It is convenient to
execute this mode before playback after discs have been exchanged.
Close the door panel before operation.
1 Press the MODE key.
2 Select “ALL DATA READ”.
3 Set the input.
Each press switches the modes as follows:
1 MUSIC TYPE
2 TITLE INPUT
3 ALL DATA READ
4 ALL INFORMATION
5 DTS ANALOG MUTE
Search in progress or
reading information
The display flashes.
When the disc is CD-TEXT
÷ Repeat the above procedure so that the complete disc information is
read into the CD player.
÷ In the case of a non-CD-TEXT disc, the “D001:NO CD TEXT” display
will appear for approx. 3 seconds.
÷ This operation is not available during the continuous play mode.
1. Please remove all CDs from the carousel before moving the unit.
2. If blinking “PLEASE WAIT“ is displayed when the door panel is opened, do not attempt to change the disc.
To quit ALL DATA READ mode
Press the 7 key.
OPERATION
B A
DISPLAY-A
÷ Each press of the key switches mechanisms A and B alternately and
lights the indicators accordingly.
÷ After selecting the mechanism, operate the player.
÷ The OPERATION A-B key is set to A during continuous play mode. It
is not possible to switch the mechanism during it.
To display the title name on a LCD remote control unit
(provided with a KENWOOD Receiver), perform the all data
read operation first, and operate the LCD remote control unit
with the door left closed. For the operation of the LCD
remote control unit, refer to the instruction manual provided
with your receiver.
Selecting Mechanism A or B
The audio played on Mechanism-A is output from OUTPUT-A and
that played on Mechanism-B is output from OUTPUT-B. This makes
it possible to enjoy different music in different rooms.