Kenwood 350 Stereo System User Manual


 
Cassette deck
(KX-W595)
Format
Track system: 4 track, 2 channel
Recording system: AC bias
(105 kHz)
Heads
Well-A: Playback head x 1
Well-B: Record/playback head x 1,
Erase head x 1
Performance
Wow and flutter: 0.3% (WRMS)
Fast-wind time: Approx 110
seconds (C-60 tape)
Frequency response:
Normal tape: 30 Hz ~ 13 kHz, +3 dB
High-bias tape: 30 Hz ~ 13 kHz,+3 dB
Signal-to-noise ratio: (3% 3rd
harmonic distortion, high bias tape):
Dolby NR OFF: >57 dB
Dolby B NR ON: >66 dB
Harmonic distortion (315 Hz,
250 nWb/m, high bias tape): <1%
Input sensitivity/impedance:
122.8 mV/47 k-ohms
Output level/impedance:
775 mV/3.3 k-ohms
General
Power consumption: 12 W
Dimensions
Width: 17-5/16"
Height: 5-1/16"
Depth: 9-13/16"
Weight (net): 8.8 lb
Speakers (JL-506)
Drivers
Woofer: 10" cone-type
Midrange: 3" cone-type
Tweeter: 1" dome-type
Power handling: 140 watts
General
Dimensions
Width: 12-5/8"
Height: 35-7/16"
Depth: 9-1/2"
Weight (net): 23.1 lbs
Because Kenwood follows a policy
of continuous product improve-
ment, these specifications may be
changed without notice.
41.
Receiver (KR-596)
Power amp section
100 watts per channel minimum
RMS, both channels driven, at 8
ohms, from 40 Hz to 20 kHz, with
no more than 0.09% total harmonic
distortion (FTC)
Pre amp section
Signal-to-noise ratio (IHF-A)
Phono: 70 dB
CD, Tape, Video: 95 dB
Input sensitivity/impedance
Phono: 3.5 mV/47 k-ohms
CD, Tape, Video: 200 mV/47 k-ohms
Tone controls
Bass: +_10 dB at 100 Hz
Treble: +_10 dB at 10 kHz
FM tuner section
Tuning frequency range:
87.5 MHz ~ 108 MHz
Useable sensitivity (IHF):
13.2 dBf (1.2 mv at 75 ohms)
50 dB quieting sensitivity (stereo):
41.2 dBf (3.2 mv at 75 ohms)
Total harmonic distortion (1 kHz)
Stereo: 0.7%
Mono: 0.6%
Signal-to-noise ratio at 65 dBf (IHF)
Stereo: 68 dB
Mono: 75 dB
Selectivity (IHF+400 kHz): 50 dB
Stereo separation at 1 kHz (IHF):
40 dB
Frequency response:
30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
AM tuner section
Tuning frequency range:
530 ~ 1700 kHz
Usable sensitivity:
12 mv/(500 mV/m)
Total harmonic distortion: 0.7%
Signal-to-noise ratio: 48 dB
Selectivity: 30 dB
General
Power consumption: 2.3 A
AC outlet (2 switched): 200 W
1.6 A max. total
Dimensions
Width: 17-5/16"
Height: 7-9/16"
Depth: 11-13/16"
Weight (net): 23.1 lb
CD player (DP-R896)
Format
Laser: Semiconductor laser
Channel format: 2 channel
Disc rotation speed: 200 ~ 500 rpm
(CLV)
D/A converters: Dual 1 Bit
Oversampling digital filter:
8 fs (352.8 kHz)
Performance
Frequency response: 4 Hz ~ 20 kHz,
+1.0 dB
Signal-to-noise ratio: >96 dB
Dynamic range: >94 dB
Total harmonic distortion + noise:
<0.007% (1 kHz)
Channel separation: >90 dB (1 kHz)
Wow and flutter: Unmeasurable
Output level/impedance:
2.0 V/3.3 k-ohms
General
Power consumption:10 W
Dimensions
Width: 17-5/16"
Height: 5-1/16"
Depth: 15-7/16"
Weight (net): 11 lb
Specifications
40.