Filter
Top Products
If the receiver doesn’t respond
when you press a button on the
remote, you need new batteries.
We recommend replacing both
batteries at the same time for longer
battery life.
1 Remove the cover by pressing
down on the ridged area and
sliding it off in the direction of
the arrow.
2 Insert 2 AA-size alkaline batteries
(be sure to pay attention to the
(+) and (-) signs when you’re
inserting the batteries).
3 Close the cover.
Loading and replacing the batteries
11.
You can use your SPECTRUM
system remote for many functions.
A few tips
• Depending on temperature,
humidity, and other environmen-
tal conditions, the operating
range of your remote is approxi-
mately 30’ and up to 30° on
either side of the receiver’s
remote light sensor.
• When the operating distance of
your remote begins to get
shorter, replace both alkaline
batteries with new ones.
• When you press 2 buttons one
after the other, press each
button securely for more than 1
second each.
• The remote may malfunction if
direct sunlight or high-frequency
fluorescent light enters the light
sensor. In this case, either move
the audio system, or remove the
light source.
Important:
The batteries that came with this
system are test batteries and may
not last as long as alkaline batteries.
The remote
10.
DISC
EFFECT
TUNER
BAND
REC/ARM
M.CALL
TAPE A TAPE B
/
IIII
CD
P.CALL EQ.
POWER
VOLUME CONTROL
REMOTE CONTROL UNIT
RC-SO501
INPUT MUTE
DISC
EFFECT
TUNER
BAND
REC/ARM
M.CALL
TAPE A TAPE B
/
IIII
CD
P.CALL EQ.
CASSETTE DECK
buttons
Note: These buttons only
work with a Kenwood
cassette deck with system
control connections (not
included with this system)
• Press
̇
or
̈
to play or
reverse tape
• Press
̇̇
or
̈̈
to
fast-forward or rewind
tape
• Press
í
to stop tape
• Press REC/ARM to put
the player into
RECORD/PAUSE mode
INPUT SELECTOR
button
Press to scroll through
input choices
POWER button
Press to turn the
system ON or OFF
TUNER buttons
• TUNER BAND:
Press to switch
between FM and
AM
• P. CALL: Press to
scroll through
preset stations
EQUALIZER buttons
For use with an optional
equalizer
• Press EFFECT to activate
and deactivate EQ
circuits
• Press M. CALL to acti-
vate EQ curves stored in
memory
MUTE button
Press to MUTE the sound,
press again to turn ON
sound
VOLUME buttons
Press
̆
or
̄
to increase or
decrease volume
CD PLAYER
buttons
• Press
̈
to play
disc, press again to
pause disc
• Press
í
to stop
disc
• Press
̈̈I
to skip
to the next track
• Press I
̇̇
to skip
to the previous
track
• Press DISC to
change to next
disc
REMOTE SENSOR
on the receiver
30˚
30˚
approx.
30 feet
1
2
3