Filter
Top Products
72
CTCSS Freq. ID Scan
This function scans through all CTCSS frequencies to
identify the incoming CTCSS frequency on the received
signal. You may find this useful when you cannot recall
the CTCSS frequency that the other persons in your
group are using.
1 Press [MENU] and turn the Tuning control to select
Menu No. 4 (CT).
2 Press [MENU] (1 s) to start the CTCSS Freq. ID
Scan.
• While scanning, the decimal point of CTCSS frequency
blinks.
• To reverse the scan direction, turn the Tuning control.
• To quit the function, press [PTT].
• When a CTCSS frequency is identified, the identified
frequency appears and blinks.
3 Press [MENU] to program the identified frequency in
place of the current CTCSS frequency. Otherwise,
press [PTT] to exit the CTCSS FREQ. ID Scan.
• Turn the Tuning control while the identified frequency
is blinking to resume scanning.
Note:
◆ Received signals are monitored through the speaker while
scanning is in progress.
◆ CTCSS Freq. ID Scan does not scan the tone if a signal is not
detected.