JVC XT-UXG66 Stereo System User Manual


 
26
2
Press SET button to call the previous settings for
next timer recording.
The REC timer indicator lights, and the setting items
appear one after another in the display window.
To erase the recording timer, press CANCEL button
in this step.
Using Daily Timer
With Daily Timer, you can wake up on your favorite music
or radio program.
You can set the daily timer whether the system is turned
on or off.
How Daily Timer actually works
The system automatically turns on, and starts playing the
specified source when the timer-on time comes. Then, when
the timer-off time comes, the system automatically turns
off (standby).
The timer settings remain stored in memory until you reset
them or disconnect the AC power cord.
1
Press CLOCK/TIMER button repeatedly until
“DAILY TIMER” and its timer-on time appear.
Each time you press the button, the timer mode
changes as follows:
2
Rotate MULTI JOG dial (
<
/
>
button on the remote
control also available) to select the hour of the timer-
on time, then press SET button.
3
Rotate MULTI JOG dial (
<
/
>
button on the remote
control also available) to select the minute of the
timer-on time, then press SET button.
5
Rotate MULTI JOG dial (
<
/
>
button on the remote
control also available) to select the minute of the
timer-off time, then press SET button.
6
Rotate MULTI JOG dial (
<
/
>
button on the remote
control also available) to select either “TUNER FM”
or “TUNER AM,” then press SET button.
7
Rotate MULTI JOG dial (
<
/
>
button on the remote
control also available) to select a preset channel, then
press SET button.
“TAPE REC” follows in the display window as selected
recording media, unless any MD recorder connected.
If XM-G6 MD recorder connected, you can select
either a tape or an MD as recording media.
8
Press SET button to select recording media, and turn
off the system.
After completing the settings...
The REC timer indicator lights and the setting items appear one
after another in the display window. Thus the Recording Timer is
ready for unattended recording.
After a timer recording is complete...
Set the volume to an appropriate listening level.
If you press a certain button while Recording
Timer is operating
Recording will stop.
To use the same Recording Timer settings
repeatedly
Once you have set the recording timer, it remains stored
in memory until you change it.
To activate the recording timer with the previous settings,
follow the procedure below:
1
Press CLOCK/TIMER button repeatedly until
“REC TIMER” appears in the display window.
DAILY TIMER
REC TIMER
Clock
(canceled)
DAILY TIMER
ON 0:00
REC TIMER
ON 0:00
REC
REC timer indicator
Continued
EN20-28.UX-G66[A]f 12/11/00, 11:44 AM26