Filter
Top Products
23
Using the Video CD Player (Video CDs)
English
Playing Video CDs with PBC
Function
(Using the Remote Control)
The System provides a Playback Control (PBC) function
which utilizes a procedure (menu selection) programmed in
a video CD.
What is the Playback Control (PBC) function?
The PBC function allows you to enjoy the following fea-
tures:
• Menu-Driven Play
You can interact with the TV screen using a menu dis-
play to select and play an entry.
• High-resolution still image display
You can display high-quality images four times clearer
than video pictures.
■ For operation, refer to the instructions supplied for the
video CD.
■ You can play video CDs with PBC function using the
menu screen (Menu-Driven Play) or without using the
menu screen (Normal Play).
• The playback operation procedure may differ depending
on the video CD you use.
• Sometimes due to improper manufacturing, video CDs will
function differently.
Playing Video CDs with the PBC Function
Using the Menu Screen (Menu-Driven Play)
■ Before playing, make sure that Repeat indicator “”or
“ ALL” is not appearing. If appearing, press the
REPEAT button on the Remote Control until it goes out.
■ Also, make sure that the “PROGRAM” or “RANDOM”
indicator is not appearing. If appearing, press the PLAY
MODE button on the Remote Control until it goes out.
1
Insert a video CD with the PBC function.
In stop mode, press the PBC button until “PBC ON” ap-
pears on the display.
Each time you press the button, the display alternates as
follows:
PBC ON Ô PBC OFF
2
Press the CD SELECT
3
/
8
button.
“PBC” appears on the display and the first menu will
appear on the TV screen.
3
To move through the next menu, press
the NEXT
¢
or
4
PREV. button.
4
Press the Number button to select the
item (track) in the menu.
• The next menu appears or the playback of the selected
track starts.
• Pressing & RETURN returns to the previous menu.
• The next track will be automatically played after the cur-
rent track is finished.
• While a part of movie is displayed on the TV in step 2,
pressing the CD SELECT 3¥8 button causes the track
being played to play from the beginning.
To pause, press the CD SELECT 3¥8 button.
To resume pause, press the CD SELECT 3¥8 button.
To stop playback, press the 7 button.
To select other item during playback, repeat step 4.
• Program Play, Random Play and Repeating Tracks cannot
be made in this Menu-Driven Play.
• When the power is turned off, the disc is changed, or a
source other than CD is set (e.g. Tuner, AUX), the PBC ON
mode changes back to PBC OFF.
• Some video CDs with the PBC function may not
automatically play the next track after the current track is
finished. This depends on the PBC program writing.
Basic Remote Control Button Functions for Menu-
Driven Play:
• The buttons on the Unit operate the same as the buttons
on the Remote Control do.
Remote Control Function
4 PREV. / NEXT ¢ Move through menu.
1 – 10, +10 Select a specific menu item.
CD SELECT 3/8 Enters the selected video CD
number or item. When a part
of movie is displayed on the
TV screen, starts playing that
track from the beginning.
&
&&
&
RETURN Returns to the previous menu
during playback.
VS-DT68V-88V[UF]_EN.book Page 23 Wednesday, June 26, 2002 3:31 PM