Filter
Top Products
13
Basic Operations
English
Changing the Color (COLOR)
(VS-DT88V only)
(Using the Remote Control)
You can change the color of the illumination on the Unit.
1
Press the
%
button to turn on the Sys-
tem.
2
Press the COLOR button.
“RANDOM COLOR” appears.
3
Press the or button to select the
setting of your choice.
The color changes as follows:
Adjusting the Volume
To increase the volume, press the VOLUME + button on the
Remote Control (or the VOL + button on the Unit).
To decrease the volume, press the VOLUME – button on
the Remote Control (or the VOL – button on the Unit).
You can adjust the volume level between 0 and 50.
CAUTION:
• DO NOT turn off the System with the vol-
ume set to an extremely high level; other-
wise a sudden blast of sound could damage
your hearing, speakers and/or headphones
when you turn on the System or start play-
ing any source next time.
REMEMBER you cannot adjust the volume
level while the System is in Standby mode.
For private listening
Connect a pair of headphones to the PHONES jack. No
sound comes out of the speakers.
Be sure to decrease the volume before connecting or putting
on headphones.
RANDOM COLOR:
The color changes randomly.
B | R:
(Blue) (Red)
The color between blue and
red is selectable in 16 steps
using the > or < button.
GRADATION:
The color changes gradually
between blue and red.
(Blue) (Red)
PHONES
PHONES
VS-DT68V-88V[UF]_EN.book Page 13 Wednesday, June 26, 2002 3:31 PM