Filter
Top Products
20
Using the CD Player
English
To Play MP3 Discs
1
Insert a disc.
The Unit searches for the disc (it may take time), and
the following information appears on the display.
2
Select a track to start playing with.
1. Press the NEXT ¢ or 4 PREV. button to select
the group you want, then press the CD SELECT 3¥8
button on the Remote Control (or the SELECT 3¥8
button on the Unit). The track number starts blinking.
2. Press the NEXT ¢ or 4 PREV. button to select
the track you want to start playback with, then press
the CD SELECT 3¥8 button on the Remote Control
(or the SELECT 3¥8 button on the Unit) again.
* Only a maximum of 10 characters (including spaces
between words) can be shown on the display. The
exceeding characters will be ignored.
Playback starts with the selected track of the selected
group.
To stop playing and remove the CD, press the 0 but-
ton on the Unit.
To pause, press the CD SELECT 3¥8 button on the Re-
mote Control or the SELECT 3¥8 button on the Unit. The
playback time blinks on the display.
To cancel pause, press the same button again. Play con-
tinues from the point where it was paused.
To Select a Track or Passage within a Track
In the stop mode or during playback, press the Number but-
ton on the Remote Control to select the track you want.
• The selected track starts playing.
• For the track number more than 10, press the +10
button then the Number button.
OR
During playback, press the NEXT ¢ or 4 PREV. but-
ton to select the track you want.
• The selected track starts playing.
• Press the NEXT ¢ button once to skip to the
beginning of the next track.
• (For Audio CDs and Video CDs)
Press the 4 PREV. button to skip to the beginning
of the track being played. Press twice quickly to skip
to the beginning of the previous track.
(For MP3 Discs)
Press the 4 PREV. button to skip to the beginning
of the previous track.
Search Play
Holding down the NEXT ¢ or 4 PREV. button, during
playback, will fast forward/backward the CD so you can
quickly find a particular passage in the track you are listen-
ing to.
• The
<
or
>
and or buttons on the Remote Control
operate the same as the
NEXT
¢
or
4
PREV.
button
does.
Programming the Playing Order
of the Tracks
(Using the Remote Control)
You can program the playing order of the tracks.
■ You can program up to 50 tracks in any desired order in-
cluding the same tracks.
■ You can only make a program when the CD Player is
stopped.
1
Insert a CD.
2
Press the CD SELECT
3
/
8
button.
3
Press the
7
button to stop the CD.
4
Press the PLAY MODE button until the
“PROGRAM” indicator appears.
(To be continued on the next page)
Group number blinks Track number
Track title scrolls
*
Group number Track number blinks
Track number Playback time
PROGRAM
PLAY
MODE
VS-DT68V-88V[UF]_EN.book Page 20 Wednesday, June 26, 2002 3:31 PM