JVC SP-MXGA3V Stereo System User Manual


 
30
Using the Microphone
English
To Apply Digital Echo
Press the ECHO button on the Remote Control.
The Echo indicator ( ) comes on.
To cancel the ECHO, press the ECHO button again. The Echo
indicator goes off.
To prevent howling and squealing (feedback) when using
the microphone, adjust the volume properly. Also, try to
avoid to pointing the microphone towards the speaker.
To Record Your Singing
1
Follow the steps in Singing Along with
Karaoke above.
2
Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see Standard Recording on page 22.
Microphone Mixing
When using special Karaoke sources for Karaoke, use the follow-
ing procedure.
1
Turn the MIC LEVEL control on the Unit to
MIN.
2
Connect a microphone by plugging it into the
MIC jack.
3
Start a source CD, tape, or other equipment.
4
Adjust the volume, as you sing into the
microphone.
To adjust the volume, use the MIC LEVEL control and VOL-
UME control on the Unit or the VOLUME +,- button on the
Remote Control.
When you want to apply echo to the microphone, press
ECHO button on the Remote Control. The Echo indicator
( ) will come on.
To Record Microphone Mixing
1
Follow the steps in Singing Along with
Karaoke above.
2
Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see Standard Recording on page 22.
Playing the Microphone Sound
through the Speakers
You can directly output the microphone sound from the speakers.
1
Turn the MIC LEVEL control on the Unit to
MIN.
2
Connect a microphone by plugging it into the
MIC jack.
3
Adjust the volume, as you sing into the
microphone.
To adjust the volume, use the MIC LEVEL control and VOL-
UME control on the Unit or the VOLUME +,- button on the
Remote control.
When you want to apply echo to the microphone, press
ECHO button on the Remote Control. The Echo indicator
( ) will come on.
Recording from the Microphone
1
Follow the steps in Singing Along with
Karaoke above.
2
Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see Standard Recording on page 22.
No echo is applied.
An echo is applied.
MX-GA3V(US).book Page 30 Thursday, April 10, 2003 9:45 AM