Filter
Top Products
55
5555
55
English
■■
Operating Other Manufacturers’ Video Equipment
This remote control supplied with the receiver can transmit control
signals for other manufacturers’ VCRs, TVs, CATV converters
and DBS tuners. By changing the transmittable signals from preset
ones to the other manufacturers’, you can operate the other manu-
facturer’s components using this remote control.
When operating the other manufacturers’ components, refer also
to the manuals supplied with them. To operate these components
with the remote control, first you need to set the manufacturer’s
code each for VCR, TV, CATV converters, and DBS tuner.
To change the transmittable signals for oper-
ating another manufacturer’s TV
1
Slide the remote control mode to “AUDIO/TV/
VCR.”
2
Press and hold TV/CATV/DBS .
Keep press until step 4 is finished.
3
Press TV.
4
Enter manufacturer’s code (2 digits) using
buttons 1 - 9, and 0.
See the list below to find the code.
Examples: For a JVC product, press 0, then 1.
For a Hitachi product, press 1, then 0.
5
Release TV/CATV/DBS .
The following buttons can be used for operating the TV (with
the remote control mode selector set to “AUDIO/TV/VCR”):
After pressing TV (with the remote control mode selector set
to “AUDIO/TV/VCR”), you can perform the following oper-
ations on a TV:
Note:
• Refer to the manual supplied with your TV.
6
Try to operate your TV by pressing TV/CATV/
DBS .
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand
of TV,
try each one until the correct one is entered.
Manufactures’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
PLAY
DVD MENU
TUNING
UPDOWN
REC
/REW
FF/
PAUSE
STROBEMEMORY
TV/VIDEO
MUTING
F.SEARCHB.SEARCH
CHANNELTV VOL VOLUME
STOP
DVD
AUDIOTV/CATV/DBS
STANDBY/ON
VCR
DECODE
SUBTITLE
TITLE
AUDIO
TIME
DIGEST
VCR
TV
SLEEP
SETTING
TV RETURN FM MODE
100+
AUDIO/
TV/VCR
CATV/DBS
CONTROL
SUBWOOFER
EFFECT
CENTER
TEST
REAR-R
ENTER
PLAY
MODE
THEATER
POSITION
DSP
MODE
REAR-L
DISPLAY
CHOICEANGLERETURN
SOUND
FM/AM
AUX
RM-STHA9U
DVD CINEMA SYSTEM
ZOOM
AUDIO/
TV/VCR
CATV/DBS
Check to see if its
remote control
mode selector is
set to the correct
position.
To operate the
audio system,
TVs, and VCRs,
set it to “AUDIO/
TV/VCR.”
TV/CATV/DBS :
Turns on and off the TV.
TV VOL +/–:
Adjusts the volume.
TV/VIDEO:
Sets the input mode (either TV or
VIDEO).
CHANNEL +/– :
Changes the channels.
1 - 10, 0, 100+ (+10):
Selects the channels.
100+ (+10) button will function as
the ENTER button if your TV re-
quires pressing ENTER after se-
lecting a channel number.
Manufacturer Code Manufacturer Code
JVC 01 SAMSUNG 12
HITACHI 10 SANYO 13
MAGNAVOX 02 SHARP 06
MITSUBISHI 03 SONY 07
PANASONIC 04, 11 TOSHIBA 08
RCA 05 ZENITH 09
TH-A9(UW).book Page 55 Monday, March 12, 2001 9:17 AM