Filter
Top Products
36
Operating other manufacturers’ products
Manufacturer Codes
Echostar 40
G.I. 01, 41
Gemini 02
Hamlin 03, 04, 05, 06
Hitachi 42
Hughes 43
Jerrold 07, 08, 09, 10, 11, 12, 13,
14, 15
Macom 16, 17, 18
Magnavox 19
Oak 20, 21, 22
Panasonic 23, 24, 44
Philips 25, 26, 27, 28, 29, 30
Pioneer 31, 32
Primestar 45
RCA 46
S. Atlanta 33, 34, 35
Samsung 36
Sony 47
Tocom 37
Toshiba 48
Zenith 38, 39
Initial setting: 01
❏ Changing the transmittable signals for operating
a DBS tuner
Set the mode selector to “AUDIO/TV/VCR/DBS.”
1
Press and hold DBS .
2
Press DBS.
3
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for DBS tuner” below.
4
Release DBS .
Now, you can perform the following operation on the DBS
tuner.
DBS : Turn on or off the DBS tuner.
After pressing DBS, you can perform the following operations
on the DBS tuner.
CHANNEL +/–: Change the channel numbers on the
DBS tuner.
1 – 9, 0: Select the channel numbers on the
DBS tuner.
See the instructions supplied with the DBS tuner for details.
5
Try to operate your DBS tuner by pressing
DBS .
When your DBS tuner turns on or off, you have entered the
correct code.
If more than one code is listed for your brand of DBS tuner,
try each one until the correct one is entered.
Manufacturers’ codes for DBS tuner
❏ Changing the transmittable signals for operating
a DVD player
Set the mode selector to “DVD.”
1
Press and hold DVR/DVD .
2
Press DVR/DVD.
3
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for DVD player” below.
4
Release DVR/DVD .
Now, you can perform the following operation on the DVD
player.
DVR/DVD : Turn on or off the DVD player.
3: Start playing.
1: Retun to the beginning of the current
chapter (or fast forward for some models).
¡: Skip to the beginning of the next chapter
(or fast reverse for some models).
7: Stop playing.
8: Pause playing.
MENU: Display the menu recorded on DVD
VIDEO discs.
5/∞/3/2: Select an item on the menu screen.
ENTER: Enter the selected item.
1 – 9, 0: Select the chapter number.
See the instructions supplied with the DVD player for details.
5
Try to operate your DVD player by pressing
DVR/DVD .
When your DVD player turns on or off, you have entered the
correct code.
If more than one code is listed for your brand of DVD player,
try each one until the correct one is entered.
Manufacturers’ codes for DVD player
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
Manufacturer Codes
JVC 01
Hitachi 12
Kenwood 05, 08
Mitsubishi 10
Onkyo 15, 16
Panasonic 04
Philips 07
Pioneer 03
Samsung 14
Sony 02
Toshiba 06
Yamaha 09
Initial setting: 01
EN32-36RXE11S[US_UX]2.p65 06/12/2004, 21:3936