Filter
Top Products
69
4. Press one of the learning buttons, to which you
want to assign a signal from the target remote
control.
The LEARN indicator starts flashing.
• If you have pressed DVD or DVD MULTI in step 3, you can
store the signals into the following buttons:
• If you have pressed PHONO in step 3, you can store the
signals into the following buttons:
• If you have pressed CD, or CONTROL to select “CD DISC,”
in step 3, you can store the signals into the following buttons:
– You can store a different set of signals into the following
buttons separately for “CD” and “CD DISC.”
• If you have pressed TAPE/MD or CDR in step 3, you can
store the signals into the following buttons:
• If you have pressed VCR 1 in step 3, you can store the signals
into the following buttons:
• If you have pressed TV/DBS in step 3, you can store the
signals into the following buttons:
– By setting the TV operation mode selector
either to “TV” or “CATV/DBS,” you can store
a different set of signals into the following
buttons.
5. While the LEARN indicator is flashing, press the
button on the target remote control.
The signal from the target remote control is sent to this remote
control.
“LEARN OK” appears and the LEARN indicator stops flashing
and remains lit. The target signal is now stored in the button
selected in step 4.
Notes:
• If the LEARN indicator stops flashing before you press the
button on the target remote control, repeat from step 4 again.
• If “ERROR” appears on the display, you have failed in storing
the signal. Try again. However some signals do not match with
this remote control even though this remote control can learn
most infrared signals.
6. • Repeat steps 4 and 5 to store more signals in
the same remote mode (source).
• Repeat steps 3 to 5 to store more signals in a
different remote mode (source).
7. Set the LEARN/TRANSMIT selector to
“TRANSMIT” to finish the storing procedure.
Notes:
• The signals stored into this remote control from the target remote
control deviate slightly from the original signals. Since some
components will not accept these deviating signals, you may not be
able to operate those components using this remote control even
though the storing procedure has been successfully finished.
• When replacing the batteries, finish changing them without delay;
otherwise, the stored signals are all erased.
EFFECT
LIVENESS
FM MODE
RETURN
100
+
123
456
7
/P 89
10
+
100
STOP PAUSE
FF/
/ REW
PLAY
PTY SEARCH
DISPALY MODE
TA/NEWS/INFO
PTY( PTY9
TV
CATV/
DBS
CHANNEL
TV/VIDEO
TV/DBS
EFFECT
LIVENESS
FM MODE
RETURN
100
+
123
456
7
/P 89
10
+
100
TV VOL
LEARN
TRANSMIT
LEARN
PTY SEARCH
STOP
PLAY
DISPALY MODE
EFFECT
LIVENESS
FM MODE
RETURN
100
+
123
456
7
/P
89
10
+
100
REC
STOP PAUSE
FF/
/ REW
PLAY
PTY SEARCH
DISPALY MODE
TA/NEWS/INFO
PTY( PTY9
CHANNEL
VCR 1
EFFECT
LIVENESS
FM MODE
RETURN
100
+
123
456
7
/P 89
10
+
100
REC
STOP PAUSE
FF/
/ REW
PLAY
PTY SEARCH
DISPALY MODE
TA/NEWS/INFO
PTY( PTY9
EFFECT
LIVENESS
FM MODE
RETURN
100
+
SET
DVD
MENU
123
456
7
/P
89
10
+
100
STOP PAUSE
FF/
/ REW
PLAY
PTY SEARCH
DISPALY MODE
TA/NEWS/INFO
PTY( PTY9
EN61-74_RX-DP20VSL[B]f.pm5 03.5.21, 19:0869