Filter
Top Products
19
Turning the Power On and Off (Standby)
On the unit:
To turn on the power, press (STANDBY/ON).
The STANDBY lamp goes off, and the front door moves down (so
that the source selecting buttons appear).
The currently selected speakers 1 and/or 2 indicator(s) also light(s)
up on the display.
• If neither speakers 1 nor 2 indicator is lit on the display, see
“Activating the Front Speakers” on page 21.
To turn off the power (into standby mode),
press
(STANDBY/ON) again.
The STANDBY lamp lights up, and the front
door automatically closes.
• A small amount of power is consumed in standby mode. To turn
the power off completely, unplug the AC power cord.
From the remote control:
To turn on the power, press AUDIO .
The STANDBY lamp goes off, and the front door
moves down (so that the source selecting buttons
appear).
The currently selected speakers 1 and/or 2 indicator(s) also light(s)
up on the display.
• If neither speakers 1 nor 2 indicator is lit on the display, see
“Activating the Front Speakers” on page 21.
To turn off the power (into standby mode),
press AUDIO
again.
The STANDBY lamp lights up, and the front
door automatically closes.
L
ANALOG
SPEAKERS
VOLUME
1
SUBWFR
R
dB
dB
The last Surround/THX/DSP mode
appears.
The volume
level appears.
STANDBY/ON
STANDBY
The last source is activated.
STANDBY/ON
STANDBY
L
ANALOG
SPEAKERS
VOLUME
1
SUBWFR
R
dB
dB
The volume
level appears.
The last Surround/THX/DSP
mode appears.
The last source is activated.
Selecting the Source to Play
Press one of the source selecting buttons.
• The selected source name and Surround/THX/DSP mode also
appear on the display.
DVD :Selects the DVD player.
DVD MULTI :
Selects the DVD player for viewing a digital video
disc using the analog discrete output mode (5.1-
channel reproduction).
To use the DVD MULTI playback mode, see page 54.
VCR 1 : Selects the video component connected to the VCR 1
IN jacks.
VCR 2 : Selects the video component connected to the VCR 2
IN jacks.
TV/DBS :Selects TV sound (or the DBS tuner).
VIDEO :Selects the video component connected to the VIDEO
jacks.
CD* : Selects the CD player.
PHONO* : Selects the turntable.
TAPE/MD
* : Selects the cassette deck (or the MD recorder).
CDR* :Selects the CD recorder.
FM/AM* : Selects the tuner.
Each time you press the button, the band alternates
between FM and AM (MW/LW).
EXT 7.1CH
: Selects the external component connected to the EXT
7.1CH IN jacks.
To use the EXT 7.1CH playback mode, see page 54.
Notes:
• When connecting an MD recorder (to the TAPE/MD IN jacks), and a
DBS tuner (to the TV SOUND/DBS IN jacks), change the source
names shown on the display. For details, see “Changing the Source
Name” on page 23.
• When you press one of the audio source selecting buttons on the
remote control marked with an asterisk (
*
), the receiver
automatically turns on.
DVD DVD MULTI VCR 1 VCR 2 TV/DBS CDVIDEO PHONO TAPE/MD CDR FM/AM EXT 7.1CH
On the unit
DVD
DVD MULTI
CD
CDR
PHONO
TAPE/MD
EXT 7.1CH
VCR 1 VCR 2
FM/AMVIDEOTV/DBS
From the remote control
Selected source name
L
ANALOG
SPEAKERS
VOLUME
1
SUBWFR
R
dB
dB
The current Surround/THX/DSP mode appears.
AUDIO
AUDIO
EN18-24_RX-DP20VSL[B]f.pm5 03.5.21, 18:5019