JVC RX-D701S Stereo Receiver User Manual


 
45
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
2
again.
1
Select and play any source.
Surround/DSP modes are not available when selecting “A
MULTI” in the audio input setting (see page 20) or when
multi channel PCM (see page 42) signals recorded in DVD-
Audio are coming in.
Make sure you have selected the input mode (analog or
digital) correctly.
2
Press SURROUND.
MULTI JOG now works for selecting Surround/DSP modes.
3
Turn MULTI JOG to select the Surround/DSP
mode you want.
Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital
multi-channel software:
*
1
“AUTO SURROUND” is the initial setting.
*
2
Available Surround modes vary depending on the speaker
settings and the incoming signals. For details, see page
44.
*
3
If an incoming signal is a multi-channel (more than 2
channel) digital signal, “MONO FILM” is not available.
*
4
If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is
not available.
To cancel Surround/DSP modes
Turn MULTI JOG so that “SURROUND OFF” appears on the
display.
When you select “AUTO SURROUND”
You can enjoy the Surround mode easily.
•For details about the Surround modes, see page 44.
When “AUTO SURROUND” is activated, the AUTO SURR indicator
lights up on the display.
How does “AUTO SURROUND” work?
If a multi-channel signal comes in, an appropriate Surround
mode will be selected automatically.
If a Dolby Digital 2-channel signal with surround signal comes
in, “PLIIx MOVIE” or “PLII MOVIE” will be selected.
If a Dolby Digital 2-channel signal without surround signal
comes in, “SURROUND OFF (stereo)” will be selected.
If a Linear PCM signal comes in, “SURROUND OFF (stereo)”
will be selected.
NOTE
“AUTO SURROUND” does not take effect in the following cases:
While playing an analog source,
While selecting one of the fixed digital decode mode—“DOLBY
DIGITAL” or “DTS” (see page 21).
Activating the Surround/DSP modes
Available Surround/DSP modes vary depending on the speaker
settings and the incoming signals. For details, see page 44.
Activating one of the Surround/DSP modes automatically
recalls the memorized settings and adjustments.
•To adjust the speaker output level, see page 36.
When activating one of the Surround/DSP modes, you
can adjust CENTER TONE. (see page 38)
When activating one of the Surround/DSP modes
(except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and
ALL CH STEREO), you can adjust CNTR ALIGNMENT. (see
page 38)
When activating “NEO:6 MUSIC,” you can adjust CENTER
GAIN. (see page 38)
When activating the DSP mode (except ALL CH
STEREO), you can adjust the following settings:
EFFECT (see page 37)
ROOM SIZE (see page 37)
LIVENESS (see page 38)
When activating “PLIIx MUSIC” and “PLII MUSIC”, you
can adjust the following settings:
PANORAMA (see page 38)
CENTER WIDTH (see page 38)
DIMENSION (see page 38)
Selecting the Surround/DSP modes
From the remote control:
1
Select and play any source.
Surround/DSP modes are not available when selecting “A
MULTI” in the audio input setting (see page 20) or when
multi channel PCM (see page 42) signals recorded in DVD-
Audio are coming in.
Make sure you have selected the input mode (analog or
digital) correctly.
2
Press SURROUND repeatedly to select the
Surround/DSP mode you want.
Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital
multi-channel software:
*
1
“AUTO SURROUND” is the initial setting.
*
2
Available Surround modes vary depending on the speaker
settings and the incoming signals. For details, see page
44.
*
3
If an incoming signal is a multi-channel (more than 2
channel) digital signal, “MONO FILM” is not available.
*
4
If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is
not available.
To cancel Surround/DSP modes
Press SURROUND repeatedly so that “SURROUND OFF”
appears on the display.
1,32
L
LS RS
S.WFR LFE
CR
DIGITAL
DIGITAL AUTO
SURROUND OFF
(Back to the beginning)
Surround modes
*
2
AUTO SURROUND*
1
HALL1 HALL2 LIVE CLUB DANCE CLUB
PAVILION THEATER1 THEATER2
MONO FILM
*
3
ALL CH STEREO*
4
L
LS RS
S.WFR LFE
CR
DIGITAL
DIGITAL AUTO
SURROUND OFF
(Back to the beginning)
Surround modes
*
2
AUTO SURROUND*
1
HALL1 HALL2 LIVE CLUB DANCE CLUB
PAVILION THEATER1 THEATER2
MONO FILM
*
3
ALL CH STEREO*
4
123
456
789
10
0
10
1
2
41-45RX-D702B[UJ]_f.p65 05.9.9, 4:50 PM45