Filter
Top Products
33
Sound adjustments
You can make sound adjustment to your preference after
completing basic setting.
Basic adjustment items
You can adjust the following items. See pages in parentheses for
details.
•You cannot select the items which is not available with the
current setting.
• The name of the item shown below is the on-screen display
indication and the name in parentheses is the display indication.
Items To do
SUBWOOFER LEVEL
*
1
Adjust the subwoofer output level. (36)
(SUBWFR LVL)
FRONT L LEVEL*
1
*
2
Adjust the left front speaker output level.
(FRONT L LVL) (36)
FRONT R LEVEL*
1
*
2
Adjust the right front speaker output level.
(FRONT R LVL) (36)
CENTER LEVEL
*
1
*
2
Adjust the center speaker output level. (36)
(CENTER LVL)
SURR L LEVEL*
1
*
2
Adjust the left surround speaker output level.
(SURR L LVL) (36)
SURR R LEVEL*
1
*
2
Adjust the right surround speaker output
(SURR R LVL) level. (36)
S BACK L LEVEL
*
1
*
2
Adjust the left surround back speaker output
(S BACK L LVL) level. (36)
S BACK R LEVEL
*
1
*
2
Adjust the right surround back speaker
(S BACK R LVL) output level. (36)
S BACK LEVEL*
1
*
2
Adjust the surround back speaker output
(S BACK LVL) level. (36)
DIGITAL EQ 63Hz (D EQ 63Hz)*
1
DIGITAL EQ 250Hz (D EQ 250Hz)*
1
DIGITAL EQ 1kHz (D EQ 1kHz)*
1
DIGITAL EQ 4kHz (D EQ 4kHz)*
1
DIGITAL EQ 16kHz (D EQ 16kHz)*
1
Adjust the equalization pattern of each
band. (37)
BASS BOOST Boost the bass level. (37)
(BASS BOOST)
INPUT ATT Attenuate the input level of analog source.
(INPUT ATT) (37)
EFFECT*
1
Adjust the effect level. (37)
(EFFECT)
ROOM SIZE Select the room size for your virtual listening
(ROOM SIZE) room. (37)
LIVENESS Select the liveness level for your virtual
(LIVENESS) listening room. (38)
PANORAMA Add “wraparound” sound effect with side-
(PANORAMA) wall image. (38)
CENTER WIDTH Adjust the center channel localization
(CENTER WIDTH) between the center speaker and the left/
right speakers. (38)
Items To do
DIMENSION Adjust sound localization pattern. (38)
(DIMENSION)
CENTER GAIN Adjust the sound localization of the center
(CENTER GAIN) channel. (38)
CENTER TONE*
1
Make the center tone soft or sharp. (38)
(CENTER TONE)
CNTR ALIGNMENT
Align the vertical localization of the center
(CENTER ALIGN) channel signals. (38)
*
1
You can adjust these items directly from the remote control.
*
2
If you have used Smart Surround Setup on pages 23 and 24,
these settings are not required.
NOTE
Some items are not available when multi channel PCM (see page
42) signals recorded in DVD-Audio are coming. See page 12 for
details.
Operation through on-screen display
menus
You can make adjustments to the basic settings easily by using
the on-screen display menus.
Menu operation buttons
On the front panel:
Button / JOG To do
ADJUST button show adjustment item previously selected.
SET button move to the selected menu or return to the
previous ADJUST MENU.
MULTI JOG •select a menu or an item.
• change a setting.
From the remote control:
Button To do
ADJUST button show adjustment item previously selected.
5 / ∞ buttons select a menu or an item.
SET button move to the selected menu or return to the
previous ADJUST MENU.
EXIT button exit from the ADJUST MENU.
2 / 3 buttons change a setting.
CONTINUED ON THE NEXT PAGE
33-38RX-D702B[UJ]_f.p65 05.9.9, 4:50 PM33