Filter
Top Products
36
English
Manufacturer Codes
JVC 01
Hitachi 10
Magnavox 02
Mitsubishi 03
Panasonic 04,11
RCA 05
Samsung 12
Sanyo 13
Sharp 06
Sony 07
Toshiba 08
Zenith 09
Initial setting: 01
By changing the transmittable signals, you can use the
supplied remote control to operate other manufacturers’
products.
• Refer also to the manuals supplied with the other products.
• To operate those components with the remote control, first you
need to set the manufacturers’ codes each for the TV, VCR,
CATV converter, DBS tuner, and DVD player.
• After replacing the batteries of the remote control, set the
manufacturers’ codes again.
• All the functions may not be assigned to the buttons for some
equipment.
❏ Changing the transmittable signals for operating
a TV
1
Press and hold STANDBY/ON TV/DBS/
CATV.
2
Press TV.
3
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for TV” on the right.
4
Release STANDBY/ON TV/DBS/CATV.
Now, you can perform the following operations on the TV.
TV VOLUME +/–: Adjust the volume on the TV.
TV/VIDEO: Change the input mode (either TV or
VIDEO).
After pressing TV, you can perform the following operations on
the TV.
STANDBY/ON Turn on or off the TV.
TV/DBS/CATV:
CHANNEL +/–: Change the channel numbers.
1 – 9, 0, 100+ (+10): Select the channel numbers.
See the instructions supplied with the TV for details.
5
After pressing TV, try to operate your TV by
pressing STANDBY/ON
TV/DBS/CATV.
When your TV turns on or off, you have entered the correct
code.
If more than one code is listed for your brand of TV, try each
one until the correct one is entered.
Operating other
manufacturers’
products
Manufacturers’ codes for TV
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.