Filter
Top Products
20
English
NOTES
• You cannot assign the same component for different terminals.
The priority order for assignment is as follows:
“DIGITAL IN 1” > “DIGITAL IN 2” > “DIGITAL IN 3.”
Ex.: When “DIGITAL IN 1” is set to “DVR/DVD.”
For “DIGITAL IN 2,” “DBS,” “VCR,” and “TV” are selectable.
• In this case, “VCR” is selected.
For “DIGITAL IN 3,” “DBS” and “TV” are selectable.
: Selectable : Not selectable
• Setting “DIGITAL IN 1” affects “DIGITAL IN 2” and “DIGITAL IN
3” settings. When you have changed “DIGITAL IN 1,” confirm the
components assigned to “DIGITAL IN 2” and “DIGITAL IN 3.”
Selecting the component video input
mode—DVD VIDEO IN/VCR VIDEO IN/
DBS VIDEO IN
When you use the component video inputs for connecting the
DVD recorder (or DVD player), VCR, or DBS, register the type of
video input jacks.
If you have not selected the appropriate video input jacks, you
cannot view the playback picture on the TV or the AV COMPU
LINK remote control system cannot operate properly (see page
32).
• You cannot use the remote control for this setting.
For the DVD recorder or DVD player (DVD VIDEO IN):
DVD <S/C> Select when connecting the DVD recorder
(or DVD player) to the composite video or S-
video input jacks.
DVD <CMPNT> Select when connecting the DVD recorder
(or DVD player) to the component video
input jacks.
Initial setting: DVD
<CMPNT>
For the VCR (VCR VIDEO IN):
VCR <S/C> Select when connecting the VCR to the
composite video or S-video input jacks.
VCR <CMPNT> Select when connecting the VCR to the
component video input jacks.
Initial setting: VCR <CMPNT>
For the DBS (DBS VIDEO IN):
DBS <S/C> Select when connecting the DBS to the
composite video or S-video input jacks.
DBS <CMPNT> Select when connecting the DBS to the
component video input jacks.
Initial setting: DBS <S/C>
NOTE
You cannot select “CMPNT” for both the VCR and the DBS at the
same time. If you select “CMPNT” for the VCR, the setting for the
DBS is fixed to “S/C” and vice versa.
Using the Midnight mode
—MIDNIGHT MODE
You can enjoy a powerful sound at night using the Midnight mode.
When the Midnight mode is activated, the MIDNIGHT indicator
lights up on the display.
MIDNIGHT <OFF> Select when you want to enjoy surround
with its full dynamic range. (No effect
applied.)
MIDNIGHT <1> Select when you want to reduce the
dynamic range a little.
MIDNIGHT <2> Select when you want to apply the
compression effect fully (useful at night).
Initial setting: MIDNIGHT <OFF>
From the remote control:
Press MIDNIGHT repeatedly to select either one of the
above.
Setting the digital input (DIGITAL IN)
terminals—DIGITAL IN 1/2/3
When you use the digital input terminals, register what
components are connected to which terminals—DIGITAL IN 1/2/3
(see page 10) so that the correct source name will appear when
you select the digital source.
• You cannot use the remote control for this setting.
Select one of the following components for each terminal:
DVR/DVD For the DVD player (or DVD recorder).
DBS For the DBS tuner.
VCR For the VCR.
TV For the TV.
Initial setting: For “DIGITAL IN 1”: DVR/DVD
For “DIGITAL IN 2”: DBS
For “DIGITAL IN 3”: VCR
DVR/DVD
DIGITAL IN 1 DBS VCR TV
DIGITAL IN 2
DVR/DVD
DBS VCR TV
DIGITAL IN 3
DVR/DVD
DBS VCR TV
4
7
10
5
8
0
6
9
10