Filter
Top Products
44
English
Operating Other Manufacturers’ Video Equipment
This remote control supplied with the receiver can transmit control
signals for other manufacturers’ VCRs, TVs, CATV converters and
DBS tuners. By changing the transmittable signals from preset ones
to the other manufacturers’, you can operate the other
manufacturer’s components using this remote control.
When operating the other manufacturers’ components, refer also to
the manuals supplied with them. To operate these components with
the remote control, first you need to set the manufacturer’s code
each for VCR, TV, CATV converters, and DBS tuner.
To change the transmittable signals for
operating another manufacturer’s TV
1. Set the remote control mode to “AUDIO/TV/
VCR.”
2. Press and hold TV/CATV/DBS .
3. Press TV/DBS.
4. Enter manufacturer’s code (three digits) using
buttons 1 – 9, and 0.
See the list on pages 46 and 47 to find the code.
Examples: For a JVC product, press 0, 3, then 6.
For a Hitachi product, press 0, 3, then 6.
5. Release TV/CATV/DBS .
The following buttons can be used for operating the TV (with
the remote control mode selector set to “AUDIO/TV/VCR”):
TV/CATV/DBS
:
Turns on and off the TV.
TV VOL +/–: Adjusts the volume.
TV/VIDEO: Sets the input mode (either TV
or VIDEO).
After pressing TV/DBS (with the remote control mode selector
set to “AUDIO/TV/VCR”), you can perform the following
operations on a TV:
CHANNEL +/–: Changes the channels.
1 – 10, 0, 100+ (+10): Selects the channels.
100+ (+10) button will function as
the ENTER button if your TV requires
pressing ENTER after selecting a
channel number.
Note:
Refer to the manual supplied with your TV.
6. Try to operate your TV by pressing TV/CATV/
DBS
.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
AUDIO/
TV/VCR
CATV/DBS
CONTROL
CHANNEL VOLUMETV VOL
STOP PAUSE
FF/
/REW
VCR 1
TV/VIDEO
TAPE
MUTING
REC
PLAY
TV/CATV/DBS
VCR 1
DVD DVD MUILTI CD TAPE/MD
TV/DBS VIDEO PHONO FM/AM
VCR 1 VCR 2
ANALOG/DIGITAL
SURROUND CNTR TONE
CNTR
SURROUND
TEST REAR-L
DISC
MODE
ON/OFF
EFFECT REAR-R
SOUND
SEA MODE
SUBWOOFER
RETURN
SET
MENU
AUDIO/
TV/VCR
EXIT
TEXT
DISPLAY
FM MODE/MUTING
SLEEP
123
456
7
/P 89
10
0
+10
100+
CATV/DBS
MENUMENU
ENTERENTER
TUNINGDOWN UP
RM-SRX889P REMOTE CONTROL
Check to see if its remote
control mode selector is set to
the correct position.
To operate the audio
system, TVs, and VCRs, set it
to “AUDIO/TV/VCR.”
To operate the CATV
converter and DBS tuner, set
it to “CATV/DBS.”
EN42_52.RX-889P[US, UB]/f 99.4.12, 5:37 PM44