Filter
Top Products
33
English
6. Press % / fi to move to the item you want to
set or adjust, then press @ / #.
On this adjustment menu, you can do the following:
“CENTER LEVEL”: Adjust the center speaker output level.
“REAR L LEVEL”: Adjust the left rear speaker output
level.
“REAR R LEVEL”: Adjust the right rear speaker output
level.
“CENTER TONE”: Select the center tone level.
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Selecting Your Favorite SEA Mode
(Also see page 19)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
3. Press % / fi to move
to “SEA,” then press @
/ #.
The SEA menu appears.
4. Press % / fi to move
to “SEA MODE.”
5. Press @ / # to select the SEA mode you want.
6. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Creating Your Own SEA Mode
(Also see page 19)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
3. Press % / fi to move to “SEA,” then press
@ / #.
The SEA menu appears.
For Dolby Pro Logic:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level. **
“REAR L LEVEL”: Adjust the left rear speaker output
level. *
“REAR R LEVEL”: Adjust the right rear speaker output
level. *
“CENTER TONE”: Select the center tone level. **
For Dolby Digital, DTS Digital Surround, and MPEG
Multichannel:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level. **
“REAR L LEVEL”: Adjust the left rear speaker output
level. *
“REAR R LEVEL”: Adjust the right rear speaker output
level. *
“CENTER TONE”: Select the center tone level. **
For JVC Theater Surround:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level. **
“REAR L LEVEL”: Adjust the left rear speaker output
level. *
“REAR R LEVEL”: Adjust the right rear speaker output
level. *
“CENTER TONE”: Select the center tone level. **
“DSP EFFECT”: Select the effect level.
Notes:
*
Not displayed when “REAR SPK” is set to “NONE” (see page
14).
**
Not displayed when “CENTER SPK” is set to “NONE” (see
page 14).
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Activating the DVD MULTI Playback Mode
(Also see page 29)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “SOURCE.”
3. Press @ / # to select “DVD MULTI.”
4. Press % / fi to move
to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
5. Press % / fi to move
to “SURROUND
LEVEL,” then press
@ / #.
The SURROUND LEVEL
menu appears.
SEA
SEA MODE :ROCK
SEA ADJUST
:OPERATE
100 10kHz1k
SURROUND LEVEL
:OPERATE
CENTER LEVEL: 0
dB
REAR L LEVEL: +6
dB
REAR R LEVEL: 4
dB
CENTER TONE : FLAT
EN31_41.RX-889P[US, UB]/f 99.4.12, 5:34 PM33