JVC RX-7520VBK Stereo Receiver User Manual


 
35
English
Cassette deck
After pressing TAPE/CDR, you can use the following buttons for
cassette deck operations:
33
33
3 : Start playback.
FF : Fast wind a tape from left to right.
REW : Fast wind a tape from right to left.
77
77
7 : Stop playback or recording.
88
88
8 : Pause playback. To release it, press 3.
REC PAUSE : Press this button to enter recording pause.
Press this button then 3 to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 11.
CD recorder
After pressing TAPE/CDR, you can use the following buttons for
CD recorder operations:
33
33
3 : Start playback.
4 : Return to the beginning of the current
(or previous) track.
¢ : Skip to the beginning of the next track.
77
77
7 : Stop playback or recording.
88
88
8 : Pause playback. To release it, press
33
33
3.
REC PAUSE : Press this button to enter recording pause.
Press this button then 3 to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 11.
CD changer
After pressing CDDISC , you can use the following buttons for CD
changer operations:
33
33
3 : Start playback.
4 : Return to the beginning of the current
(or previous) track.
¢ : Skip to the beginning of the next track.
77
77
7 : Stop playback.
88
88
8 : Pause playback. To release it, press
33
33
3.
1 6, 7/P : Select the number of a disc installed in a CD
changer.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301),
you can do the following operations using the number buttons after
pressing CD:
1
Select a disc number.
2
Then select a track number (always enter two digits).
3
Start playback.
Examples:
Selecting disc number 3, track number 2, and starting playback.
Press 3, then, 0, 2, then 3.
Selecting disc number 10, track number 5, and starting playback.
Press 1, 0, then, 0, 5, then 3.
Selecting disc number 105, track number 12, and starting
playback.
Press 1, 0, 5, then 1, 2, then 3.
EN30-42.RX-7520V[C]f.pm5 02.2.14, 4:33 PM35