Filter
Top Products
32
Using Surround Modes
Once you have adjusted the surround mode, you can use the same adjustments every
time you want to enjoy Surround Modes.
From the front panel:
1. Press SURROUND so that the Control
%%
%%
% /
fifi
fifi
fi buttons
work for selecting the surround/DAP/3D-PHONIC
modes.
The lamp above the button lights up.
2. Press Control
%%
%%
% /
fifi
fifi
fi to select one of the surround
mode (“PRO LOGIC,” “3CH LOGIC” or
“THEATER”).
Each time you press the button, the surround/DAP/3D-
PHONIC modes change as follows:
* As for the 3D-PHONIC modes (see page 23) and the
DAP modes (see page 25), one of the previously
selected mode appears on the display.
3. Select and play a sound source which was processed with Dolby Surround and
is labeled with
DOLBY SURROUND
mark.
To cancel surround mode
Select “OFF” in step 2 above.
From the remote control:
1. Press SOUND CONTROL so that 10 keys work for
adjusting the sound.
2. Press SURROUND until the mode you want appears
on the display.
The previous mode is recalled at first (with its previous
settings) and is shown on the display.
The indicator for that mode also lights up on the display.
Each time you press the button, the surround modes
change as follows:
3. Select and play a sound source which was processed with Dolby Surround and
is labeled with
DOLBY SURROUND
mark.
To cancel surround mode
Select “OFF” in step 2 above.
SURROUND
Ex.
PROLOGIC THEATER
PAVILION*
3CHLOGIC
3DACTION*
OFF
Note:
When one of the surround modes
is selected, the corresponding
indicator lights up on the display.
3
SURROUND
SOUND
CONTROL
PROLOGICTHEATER 3CHLOGIC
OFF
RX-554VBK(J)_0117-001B_En.20-38 98.1.6, 11:37 AM32