Filter
Top Products
30
Notes:
• The sound levels of the left and
right rear speakers will be the
same.
• You cannot set the sound level
of the rear speakers when you
have selected “3CHLOGIC.”
• You cannot set the sound level
of the center speaker when you
select “PHANTOM” for the
center mode.
EFFECT 1 EFFECT 2
EFFECT 4
EFFECT 3
EFFECT 5
9. If necessary, adjust the speaker output balance as
follows:
• To adjust the rear speaker output level, press Control
% / fi until “– REAR +” appears on the display, then
press Control @ / #.
• To adjust the center speaker output level, press
Control % / fi until “–CENTER+” appears on the
display, then press Control @ / #.
10. Press Control
%%
%%
% /
fifi
fifi
fi until “TEST” appears on the
display, then press Control
@@
@@
@ /
##
##
# twice to stop the
test tone.
If you have selected JVC Theater Surround, go to the following steps.
11. Press Control
%%
%%
% /
fifi
fifi
fi until “–EFFECT+” appears on
the display.
12. Press Control
@@
@@
@ /
##
##
# to adjust the effect level.
Each time you press the button, the effect level changes
as follows:
As the number increases, the effect of the Theater
Surround mode becomes stronger.
From the remote control:
If you have already set the center speaker size following the procedure described on
page 15, you can use the remote control for surround mode preparation.
1. Press SOUND CONTROL so that 10 keys work for
adjusting the sound.
2. Press SURROUND until the surround mode you
want appears on the display.
The previous mode is recalled (with its previous
settings) and is shown on the display.
The indicator for that mode also lights up on the display.
Each time you press the button, the surround modes
change as follows:
3. Press DELAY to adjust the delay time of the rear
speaker output.
Each time you press the button, the delay time changes
as follows:
Continued to the next page.
DELAY 1 DELAY 2 DELAY 3
Note:
When you have selected
“3CHLOGIC” or “THEATER,” you
cannot adjust the delay time.
5
DELAY
PROLOGICTHEATER 3CHLOGIC
OFF
SOUND
CONTROL
3
SURROUND
Note:
When you have selected
“PROLOGIC” or “3CHLOGIC,”
you cannot select the effect level.
RX-554VBK(J)_0117-001B_En.20-38 98.1.6, 11:37 AM30