JVC PIM171200 CD Player User Manual


 
38
ENGLISH
DAB TUNER OPERATIONS
We recommend that you use DAB (Digital Audio
Broadcasting) tuner KT-DB1500 with your unit.
If you have another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
Refer also to the Instructions supplied with
your DAB tuner.
What is DAB system?
DAB is one of the digital radio broadcasting
systems available today. It can deliver CD
quality sound without any annoying
interference and signal distortion.
Furthermore, it can carry text, pictures and
data.
In contrast to FM broadcast, where each
programme is transmitted on its own
frequency, DAB combines several
programmes (called “services”) to form one
“ensemble.” With the DAB tuner connected
with this unit, you can enjoy these DAB
services.
Tuning in to an ensemble and
one of the services
A typical ensemble has 6 or more programmes
(services) broadcast at the same time. After
tuning in to an ensemble, you can select a
service you want to listen to.
1
Select the DAB tuner (DAB1 – 3).
Each time you press the button,
the source changes as described
on page 7.
2
Select the DAB band (DAB1, DAB2
or DAB3).
Each time you press and hold
the button, the DAB band
changes as follows:
Note:
This receiver has three DAB bands (DAB1,
DAB2, DAB3). You can use any of them to tune
into an ensemble.
3
Start searching an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
SOURCE
ATT
M
BAND
MODE
Press ¢ to search
ensembles of higher
frequencies.
Press 4 to search
ensembles of lower
frequencies.
D1
(DAB1)
D2
(DAB2)
D3
(DAB3)
SSM
10
7
8
9
11
OFF
STDM
MODE
BAND
TP/PTY DISPSEL
INT RPT RND
MONOEQ
ATT
SOURCE
12
SSM
RND RPT INT
EQ
SEL
TP/PTY DISP
BAND
MODE
ATT
MONO
SOURCE
9
3
ST
M
OFF
1
7
8
2
10
11
5
12
6
D
Press ON CLOSE to
turn on the power.
EN38-41KD-LX333_111R[E]4.pm5 12/22/01, 6:24 PM38