Filter
Top Products
27
ENGLISH
To set Custom Equalizer Link — CEQ LINK
A different sound mode (CEQ) can be stored in
memory for each source so that you can change
the sound modes simply by changing the
sources. When shipped from the factory, this
mode is deactivated.
• LINK ON: Different sound modes for
different sources.
• LINK OFF: One sound mode for all
sources.
To set the clock display — CLOCK DISP
You can set the clock to be shown on the display
when the unit is turned on. When shipped from
the factory, the clock is set to be shown on the
display.
• CLOCK ON: Clock display is turned on.
• CLOCK OFF: Clock display is turned off.
To select the level meter — LEVEL
You can select the level meter display according
to your preference. When shipped from the
factory, “NORMAL” is selected.
• NORMAL: Normal audio level meter will
be shown on both sides of the
display.
• SIDE: Display illumination moves from
inside to outside.
• FULL: Level meter is fully shown on
the main display and display
illumination starts.
• OFF: Level meter disappears but the
center display illuminates.
• ALL OFF: Level meter and center display
turns off.
To select the dimmer mode — DIMMER
When you turn on the car head lights, the display
automatically dims (Auto Dimmer). When
shipped from the factory, Auto Dimmer mode is
activated.
• AUTO: Activates Auto Dimmer.
• OFF: Cancels Auto Dimmer.
• ON: Always dims the display.
Note on Auto Dimmer:
Auto Dimmer equipped with this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
To select the telephone muting
— TELEPHONE
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either “MUTING 1” or “MUTING 2,”
whichever mutes the sounds from this unit. When
shipped from the factory, this mode is
deactivated.
• MUTING 1: Select this if this setting can
mute the sounds.
• MUTING 2: Select this if this setting can
mute the sounds.
• MUTING OFF: Cancels the telephone muting.
To turn on/off the key-touch tone
— BEEP SW
You can deactivate the key-touch tone if you do
not want it to beep each time you press a button.
When shipped from the factory, the key-touch
tone is activated.
• BEEP ON: Activates the key-touch tone.
• BEEP OFF: Deactivates the key-touch tone.
To adjust the display contrast level
— CONTRAST
You can adjust the display contrast level among
“1” (dark) to “10” (bright). When shipped from the
factory, the display contrast level is set at level
“5.”
To select the scroll mode — SCROLL
You can select the scroll mode for the disc
information if it consists of more than 10
characters. When shipped from the factory, Auto
Scroll mode is set to “ONCE.”
• ONCE: Scrolls only once.
• AUTO: Repeats the scroll
(in 5-second intervals).
• OFF: Cancels Auto Scroll.
Note:
Even if the scroll mode is set to “OFF,” you can scroll
the display by pressing DISP (D) for more than 1
second.
EN25-33KD-LX333_111R[E]4.pm5 12/22/01, 6:21 PM27