JVC MX-JE5 Stereo System User Manual


 
15
Creating 3-dimensional Sound Field
—3D Phonic
While playing a disc...
Presetting Automatic DVD Video Sound
Increase Level
The DVD Video sound is sometimes recorded at a lower level
than for other discs and sources. You can set the increase level
for the currently loaded DVD Video, so you do not have to
adjust the volume when you change the source
.
As the number increases, sound level also increases.
Changing the Scanning Mode
(MX-JE5 only)
MX-JE5 supports progressive scanning.
If you connect a progressive TV through the COMPONENT
jacks, you can enjoy a high quality picture from the built-in
DVD player by selecting “PROGRESSIV.”
PROGRESSIVE indicator lights on when progressive
mode is selected.
Changing the Picture Tone
While showing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own taste.
To select a preset picture tone
1
While playing, display VFP setting screen.
2
Select a preset picture tone.
To adjust the picture tone
1
Select “USER1” or “USER2.”
Follow steps
1
and
2
explained above.
2
Select a parameter you want to adjust.
3D ACTION
Suitable for action movies and sports
programs.
3D DRAMA
Creates natural and warm sound. Enjoy
movies in a relaxed mood.
3D THEATER
Enjoy sound effects like in a major
theater.
PROGRESSIV
Progressive scanning. For a
progressive TV.
INTERLACE
Interlaced scanning. For a
conventional TV.
INFO
3D ACTION 3D DRAMA
3D OFF 3D THEATER
3D PHONIC
ACTION
On the TV screen
Remote
ONLY
INFO
PROGRESSIV
INTERLACE
(holding then...)
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings (see below).
Remote
ONLY
INFO
On the TV screen
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
0
(holding then...)
NORMAL CINEMA
USER2 USER1