JVC LVT0749-003A Stereo System User Manual


 
– 19 –
UNFINALIZE
DISC
SLEEP
RDS
EON
[
TA
News
Info
]
d
B
REC
LEVEL
PITCH
STEREO
UNFINALIZE
DISC
To preset stations manually—Manual Presetting
On the remote control ONLY:
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 2
again.
1
Tune into a station you want to preset.
See “Tuning into a Station” on page 18.
2
Press SET.
The preset number appears and starts flashing.
3
Press the number buttons to select a preset number.
Ex.: For preset number 5, press 5.
For preset number 15, press +10, then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
4
Press SET again.
“MEMORY” appears in the main display, and the tuned
station in step 1 is stored in the preset number selected
in step 3.
Storing a new station on a used number erases the
previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will be erased in a few days. If this happens,
preset the stations again.
Tuning into a Preset Station
On the remote control ONLY:
1
Press SOURCE repeatedly until FM or AM (MW/
LW) is selected.
2
Press the number buttons to select a preset number.
Ex.: For preset number 5, press 5.
For preset number 15, press +10, then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
Receiving FM Stations with RDS
RDS allows FM stations to send an additional signal along
with their regular program signals. For example, the
stations send their station names, as well as information
about what type of program they broadcast, such as sports
or music, etc.
When tuned into an FM station which provides the RDS
service, the RDS indicator lights on the display.
Some FM stations do not provide RDS signals.
With the unit, you can receive the following types of RDS
signals.
PS (Program Service):
Shows commonly known station names.
PTY (Program Type):
Shows types of broadcast programs.
RT (Radio Text):
Shows text messages the station sends.
EON (Enhanced Other Networks):
Provides the information about the types of the
programs sent by other RDS stations than the one
being received.
More about RDS
Broadcast RDS signals differ among FM stations. If in doubt,
check with local radio stations for details on RDS in your area.
RDS may not work correctly if the received station is not
transmitting the signals properly or if the signal strength is
weak.
UNFINALIZE
DISC
SLEEP
RDS
EON
[
TA
News
Info
]
d
B
REC
LEVEL
PITCH
STEREO
UNFINALIZE
DISC
Ex.: When selecting preset number “8”
Ex.: When selecting preset number “8”
Ex.: When selecting FM
UNFINALIZE
DISC
SLEEP
RDS
EON
[
TA
News
Info
]
d
B
REC
LEVEL
PITCH
STEREO
UNFINALIZE
DISC
CD RW
UNFINALIZE DISC
REC
SLEEP
RDS EON
[
TA News Info
]
d
B
REC LEVEL
TEXT
PITCH
STEREO
UNFINALIZE DISC
321
OVER
REC
CD RW
UNFINALIZE DISC
REC
SLEEP
RDS EON
[
TA News Info
]
1CD
ALL SKIP
ON
d
B
REC LEVEL
TEXT
PITCH
STEREO
UNFINALIZE DISC
321
OVER
REC
EN17-22_CA-NXCDR7R[B]_f 01.7.23, 9:59 AM19