Filter
Top Products
9
ENGLISH
Storing stations in memory
You can use one of the following methods to
store broadcasting stations in memory.
• Automatic preset: SSM (Strong-station
Sequential Memory)
• Manual preset
• Storing your favorite station into the EX button
Automatic preset: SSM
You can preset up to 6 local stations in each FM
band (FM1, FM2, and FM3).
1
Select the band (FM1, FM2, or FM3).
2
Press MODE repeatedly until “SSM”
appears.
3
Press SEL (select).
Local stations with the strongest signals are
searched for and stored automatically in the
band you have selected (FM1, FM2, and FM3).
These stations are preset in the number
buttons—No. 1 (lowest frequency) to No. 6
(highest frequency).
When automatic preset is over, the station stored
in the number 1 button will be automatically tuned
in.
“--SSM--” appears, then disappears
when automatic preset is over.
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the
preset channel number 1 of the FM1 band
1
Select the FM1 band.
2
Tune in to a station (in this example,
of 88.3 MHz).
3
Press and hold the number button
(in this example, 1) for more than
2 seconds.
4
Repeat the above procedure to store
other stations into other preset
numbers.
“P1” flashes for a few seconds.
FM1
FM2
FM3
AM
To tune in to stations of
higher frequencies
To tune in to stations of
lower frequencies
EN08-11KW-XC939[EE]f.pm6 6/23/03, 3:48 PM9