Filter
Top Products
11
ENGLISH
Other convenient tuner functions
Scanning broadcast stations
1
Select “SCAN.”
* When receiving an FM stereo broadcast.
2
Start scanning.
Each time a broadcast is tuned
in, scanning stops for about
5 seconds (tuned frequency
number flashes on the display),
and you can check what
program is now being
broadcasted.
If you want to listen to that program, press
MODE button again to stop scanning.
Showing an assigned name
If you have assigned a name to a station
frequency, the display shows its assigned name
after the station frequency is displayed.
When the station name is displayed, the
STATION indicator lights up on the display (see
page 33).
To confirm the station frequency while the
assigned name is shown, press DISP (display).
Each time you press the button, the assigned
name and the station frequency alternate on the
display.
Note:
If no name is assigned, “NO NAME” will appear
when you press DISP (display).
*SSM
SCAN
*MONO
Canceled
(frequency indication)
Selecting FM reception mode
When an FM stereo broadcast is hard to
receive, follow the procedure below:
1
Select “MONO.”
2
Select FM reception mode.
FM reception mode turns on
(“MONO ON”) and off (“MONO
OFF”) alternately.
When the monaural mode is turned on, the
sound you hear becomes monaural but reception
will be improved.
Lights up
J
Lights up when receiving an FM
broadcast in stereo.
SSM
SCAN
MONO
Canceled
(frequency indication)
EN08-11KW-XC939[EE]f.pm6 6/23/03, 3:48 PM11