Filter
Top Products
8
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching for a station automatically:
Auto search
1
Select the band (FM1, FM2, FM3 or
AM).
Note:
This receiver has three FM bands (FM1, FM2,
and FM3). You can use any one of them to listen
to an FM broadcast.
2
Start searching for a station.
To stop searching before a station is
received, press the same button you have
pressed for searching.
Searching for a station manually:
Manual search
1
Select the band (FM1, FM2, FM3, or
AM).
2
Press and hold ¢ or 4
until “M” (manual) starts flashing on
the display.
3
Tune in to a station you want while
“M” is flashing.
• If you release your finger from the button, the
manual mode will automatically turn off after
5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM and
9 kHz for AM) until you release the button.
Selected band appears.
When a station is received, searching stops.
FM1
FM2
FM3
AM
To search stations of
higher frequencies
To search stations of
lower frequencies
To tune in to stations of
higher frequencies
To tune in to stations of
lower frequencies
FM1
FM2
FM3
AM
EN08-11KW-XC939[EE]f.pm6 6/23/03, 3:48 PM8