Filter
Top Products
12
ENGLISH
CD OPERATIONS
Playing a CD
1
Insert a disc into the loading slot.
The unit turns on, draws
in the CD and starts
playback automatically.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing
CD/CH turns on the unit and starts playback
automatically.
\
Current track
\
Total playing time of
the inserted disc
Total track number of
the inserted disc
Elapsed playing time
Notes:
• When a CD is inserted upside down, the CD
automatically ejects.
• When you play a CD Text, the disc title and
performer appear on the display. Then the current
track title appears on the display, followed by the
track number and elapsed playing time. See also
“Playing a CD Text” (page 15) and “Selecting the
scroll mode—SCROLL” (page 32).
If a CD Text includes much text information, some
may not appear on the display.
• If you play a CD with assigned name (see page 33),
the assigned name appears on the display, followed
by the track number and elapsed playing time. See
also “Showing an assigned name” on page 15.
To stop play and eject the CD
Press CD 0.
CD play stops and the CD automatically ejects
from the loading slot (“EJECT” appears on the
display). The source changes to the last selected
source.
Notes:
• If the ejected disc is not removed for about
15 seconds, the disc is automatically inserted again
into the loading slot to protect it from dust. (CD
play will not start this time.)
• You can eject the CD even when the unit is turned
off.
• If you change the source, CD play also stops
(without ejecting the disc).
Next time you select “CD” as the source, CD play
starts from where playback had been stopped
previously.
CD indicator lights up.
EN12-15KW-XC939[EE]f.pm6 6/23/03, 3:48 PM12