Filter
Top Products
62
ENGLISH
DAB Tuner Operations
• PTY Standby Reception works for the DAB
tuner only using a Dynamic PTY, but not a
Static PTY.
• TA Standby Reception for FM RDS station
and Road Traffic News Standby Reception
for DAB cannot be set separately. The T/P
button always work for the both Standby
Reception modes when the DAB tuner is
connected.
General Settings—PSM
• “Auto Dimmer” may not work correctly on
some vehicles, particularly on those having a
control dial for dimming. In this case, change
the “Dimmer” setting to any one other than
“Auto.”
• If “LCD Type” is set to “Auto,” the display
pattern will change to the “Negative” or
“Positive” pattern depending on the
“Dimmer” setting
• If you change the “Amp Gain” setting from
“High PWR” to “Low PWR” while the
volume level is set higher than “Volume 30,”
the unit automatically changes the volume
level to “Volume 30.”
Other Main Functions
Assigning titles to the sources
• When you try to assign a title to a 41st disc,
“Name Full” appears and you cannot enter
the text entry mode. Delete unwanted titles
before assignment.
• When the CD changer is connected, you can
assign titles to CDs in the CD changer. These
titles can also be shown on the display if you
insert the CDs in this unit.
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the unit
and the disc, but will be annoying.
It is recommend to stop disc play while driving on such rough roads.
Numbers and symbols
Characters shown on the display
In addition to the Roman alphabets (A – Z,
a –z), the following characters will be used
to show the various information on the
display.
• You can also use the following characters
to assign titles (see page 41).
Lower case
Upper case
58-65_KD-LHX501_2_Ef.p65 2/11/04, 8:20 PM62