Filter
Top Products
8
ENGLISH
* Small animation displays are used for showing
not only the source’s main information
(illustrated on this page as examples), but also
showing some other information. For details, see
each related section.(For the DAB tuner, small
animation display will show no animation.)
Cancelling the display
demonstration
When shipped from the factory, display
demonstration (MovieDemo) has been activated,
and starts automatically when no operations are
done for about 20 seconds.
• It is recommended to cancel the
demonstration before you use the unit for the
first time.
To cancel the display demonstration, follow
the procedure below:
1
Press and hold SEL
(select) for more than 2
seconds so that
“MovieDemo” appears
on the display.
(see pages 36 and 37.)
2
Select “Off.”
3
Press SEL (select) to
finish the setting.
To activate the display demonstration, repeat
the same procedure and select “Interval” or “All
Time” in step 2.
• For more details, see “To set the movie demo—
MovieDemo” on page 37.
Changing the display pattern
You can change the display pattern.
The number of the selectable display patterns
varies according to the playback sources.
However, the unit basically provides three main
display patterns for each source, and once one
of these three patterns is selected, the same
pattern is used for all the sources.
Press DISP (D).
Each time you press the button,
the display patterns change as
follows:
Large animation
display
Small animation
displays*
Clock time
display
In this manual, the illustrations of the display are
mainly of the large animation display (initial
setting). If you have changed the display patterns
or some PSM items, the actual displays you see
will be different.
Note:
While playing a source, you can also show the level
meter on the display. For details, see “Activating the
level meter” on page 34.
EX.: When playing a CD
EN07-08LH2000R[E]f.pm5 02.3.29, 4:22 PM8