JVC KD-LH2000R CD Player User Manual


 
15
ENGLISH
Using TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from the
current source (another FM station or CD and other
connected components).
TA Standby Reception will not work if you are listening
to an AM station.
Press TP/PTY (T) to activate TA Standby
Reception.
7 When the current source is FM, the TP
indicator either lights up or flashes.
If the TP indicator lights up, TA Standby
Reception is activated.
If a station starts broadcasting a traffic
announcement, Traffic Flash appears on
the display, and this unit automatically tunes
in to the station. The volume changes to the
preset TA volume level (see page 18) and
the traffic announcement can be heard.
If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
to tune in to another station providing these
signals. Press ¢ or 4 to search
for such a station.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, Traffic Flash appears on the
display, and this unit automatically changes the
source and tunes in to the station.
To deactivate the TA Standby Reception, press
TP/PTY (T) again.
REG indicator
AF indicator
Note:
If a DAB tuner is connected and Alternative Reception
(for DAB services) is activated, Network-Tracking
Reception is also activated (AF) automatically. On
the other hand, Network-Tracking Reception cannot be
deactivated without deactivating Alternative Reception.
(See page 52.)
1
Press and hold SEL
(select) for more than 2
seconds so that one of
the PSM items appears
on the display.
(PSM: see pages 36 and 37.)
2
Press 5 (up) or
(down) repeatedly until
Tuner is selected as
the PSM category (it is
shown on the left side
of the display).
3
Select AF-Regnl
(alternative
frequency/
regionalization
reception).
4
Select the desired
mode—“AF,
AF Reg or Off.
5
Finish the setting.
TP indicator
EN14-19LH2000R[E]f.pm5 02.3.29, 4:23 PM15