Filter
Top Products
35
ENGLISH
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
• The PSM items are grouped into five
categories—“Disp (display),” “Clock,” “Tuner,”
“Color,” and “Audio.”
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See pages 36 and 37.)
2
Press 5 (up) or ∞ (down) repeatedly
until your desired PSM category
appears on the left side of the
display.
3
Select the PSM item you want to
adjust.
OTHER MAIN FUNCTIONS
4
Adjust the PSM item selected.
5
Repeat steps 2 to 4 to adjust the other
PSM items if necessary.
6
Finish the setting.
To set clock—Clock Hr, Clock Min, 24H/12H
You can set the clock using the PSM control.
• You can select either 12-hour system or 24-
hour system.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press 5 (up) or ∞ (down) repeatedly until “Clock”
is selected as the PSM category (it is shown on
the left side of the display).
3 Press ¢ or 4 to select “Clock Hr
(hour).”
4 Turn the control dial to adjust the hour.
5 Press ¢ or 4 to select “Clock Min
(minute).”
6 Turn the control dial to adjust the minute.
7 Press ¢ or 4 to select “24H/12H.”
8 Turn the control dial to select either “24Hours”
or “12Hours.”
9 Press SEL (select) to finish the setting.
EN35-43LH2000R[E]f.pm5 02.3.29, 4:25 PM35