JVC KD-AR770 CD Player User Manual


 
ENGLISH
23
Symptoms Remedies/Causes
MP3/WMA playback
Tracks do not play back in the order
you have intended them to play.
Playback order is determined when the files are
recorded.
Elapsed playing time is not correct. This sometimes occurs while playing. This is
caused by how the tracks are recorded on the disc.
“NO FILES” appears on the display. Insert a disc that contains MP3/WMA tracks.
Correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case),
numbers, and a limited number of symbols.
USB memory playback
Noise is generated. The track played back is not an MP3/WMA track.
Skip to another file. (Do not add the extension
code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
“CHECK” keeps flashing on the
display.
Readout time varies depending on the USB
memory.
Do not use too many hierarchy and folders.
Turn off the power then on again.
“NO FILES” flashes on the display. Attach a USB memory that contains tracks
encoded in an appropriate format.
“NOT SUPP” appears on the display
and track skips.
The track is unplayable.
“READ” and “FAILED” appear
alternately on the display, then
returns to the previous source.
The attached USB memory may be
malfunctioning, or may not have been
formatted correctly. The files included in the
USB memory are corrupted.
Do not pull out or attach the USB memory
repeatedly while “CHECK” appears on the
display.
Correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case),
numbers, and a limited number of symbols.
While playing a track, sound is
sometimes interrupted.
MP3/WMA tracks have not been properly copied
into the USB memory.
Copy the MP3/WMA track again into the USB
memory, and try again.
Continued on the next page...
EN20-25KD-G725[UN]3.indd 23EN20-25KD-G725[UN]3.indd 23 11/23/05 9:36:36 AM11/23/05 9:36:36 AM