JVC KD-AR770 CD Player User Manual


 
12
ENGLISH
Playing from a USB memory
This unit can play MP3/WMA tracks stored in a
USB memory.
All tracks in the USB memory will be played
repeatedly until you change the source.
Removing the USB memory will also stop
playback.
~
Ÿ
If a USB memory has been attached...
Playback starts from where it has been stopped
previously.
If a different USB memory is currently
attached, playback starts from the beginning.
To eject the USB memory, straightly pull it out
from the unit.
Cautions:
• Avoid using the USB memory if it might
hinder your safety driving.
• Make sure all important data has been
backed up to avoid losing the data.
USB input terminal
USB memory
About MP3 and WMA tracks
MP3 and WMA “tracks” (words “file” and
“track” are used interchangeably) are recorded
in “folders.”
About the CD changer
It is recommended to use a JVC
MP3-compatible CD changer with your unit.
You can also connect MP3-incompatible
CD changers. However, these units are not
compatible with MP3 discs.
You cannot use the CH-X99, CH-X100, and
KD-MK series CD changers with this unit.
You cannot play any WMA disc in the CD
changer.
Disc text information recorded in the CD
Text can be displayed when a JVC CD Text
compatible CD changer is connected.
For connection, see Installation/Connection
Manual (separate volume).
To fast-forward or reverse the track
To go to the next or previous tracks
To go to the next or previous folders (only for
MP3/WMA/USB)
For MP3 tracks:
For WMA tracks:
EN08-17_KD-G722_003A_3.indd 12EN08-17_KD-G722_003A_3.indd 12 11/23/05 9:48:41 AM11/23/05 9:48:41 AM