Filter
Top Products
21
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See “Selecting the external component”
on page 15.
1
Select the external component
(LINE IN).
• If “LINE IN”* does not appear on the
display, see page 15 and select the
external input (“LINE IN”).
* Displayed only when one of the following
sources is selected—FM, AM, and CD.
Note on One-Touch Operation:
When you press CD (CD-CH), the power
automatically comes on. You do not have to press
to turn on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 13 and 14.)
CD
LINE IN
EN21-21_KD-SX60WT_50M[J]f.p65 3/26/03, 4:07 PM21