Filter
Top Products
26
ENGLISH
Symptoms Remedies/Causes
DAB
• “noSIGNAL” appears on the display.
Move to an area with stronger signals.
• “RESET 8” appears on the display. Connect this unit and the DAB tuner correctly
and reset the unit (see page 2).
• “ANTENANG” appears on the
display.
Check the cords and connections.
• The DAB tuner does not work at all. Reconnect this unit and the DAB tuner correctly
and reset the unit (see page 2).
iPod/D. player playback
• The iPod or D. player does not turn
on or does not work.
• Check the connecting cable and its connection.
• Update the firmware version.
•
Change the battery.
• Buttons do not work as intended. The functions of the buttons have been changed.
Press MODE before performing the operation.
• The sound is distorted. Deactivate the equalizer either on the unit or the
iPod/D. player.
• “NO IPOD” or “NO DP” appears on
the display.
Check the connecting cable and its connection.
• Playback stops. The headphones are disconnected during
playback. Restart the playback operation using
the control panel (see page 19).
• No sound can be heard when
connecting an iPod nano.
Disconnect the headphones from the iPod nano.
• No sound can be heard.
• “ERROR 01” appears on the display
when connecting a D. player.
Disconnect the adapter from the D. player. Then,
connect it again.
• “NO FILES” or “NO TRACK”
appears on the display.
No tracks are stored. Import tracks to the iPod or
D. player.
• “RESET 1” – “RESET 7” appears on
the display.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
• “RESET 8” appears on the display. Check the connection between the adapter and
this unit.
• The iPod’s or D. player’s controls do
not work after disconnecting from
this unit.
Reset the iPod or D. player.
EN24-27KD-G427[EE]f.indd 26EN24-27KD-G427[EE]f.indd 26 11/22/05 5:54:19 PM11/22/05 5:54:19 PM