JVC KD-G320 CD Player User Manual


 
20
ENGLISH
Symptoms Remedies/Causes
MP3/WMA playback
A longer readout time is required
(“CHECK” keeps flashing on the
display).
Do not use too many hierarchies and folders.
Tracks do not play back in the order
you have intended them to play.
Playback order is determined when the files are
recorded.
Elapsed playing time is not correct. This sometimes occurs during play. This is caused
by how the tracks are recorded on the disc.
“NO FILES” appears on the display. Insert a disc that contains MP3/WMA tracks.
Correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case),
numbers, and a limited number of symbols.
CD changer
“NO DISC” appears on the display. Insert a disc into the magazine.
“NO MAG” appears on the display. Insert the magazine.
“RESET 8” appears on the display. Connect this unit and the CD changer correctly
and press the reset button of the CD changer.
“RESET 1” – “RESET 7” appears on
the display.
Press the reset button of the CD changer.
The CD changer does not work at all. Reset the unit (see page 2).
iPod/D. player playback
The iPod or D. player does not turn
on or does not work.
Check the connecting cable and its connection.
Update the firmware version.
Change the battery.
Buttons do not work as intended. The functions of the buttons have been changed.
Press MODE before performing the operation.
The sound is distorted. Deactivate the equalizer either on the unit or the
iPod/D. player.
“NO IPOD” or “NO DP” appears on
the display.
Check the connecting cable and its connection.
Playback stops. The headphones are disconnected during
playback. Restart the playback operation using the
control panel (see page 14).
No sound can be heard when
connecting an iPod nano.
Disconnect the headphones from the iPod nano.
No sound can be heard.
“ERROR 01” appears on the display
when connecting a D. player.
Disconnect the adapter from the D. player. Then,
connect it again.
“NO FILES” or “NO TRACK”
appears on the display.
No tracks are stored. Import tracks to the iPod or
D. player.
“RESET 1” – “RESET 7” appears on
the display.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
“RESET 8” appears on the display. Check the connection between the adapter and
this unit.
The iPod’s or D. player’s controls do
not work after disconnecting from
this unit.
Reset the iPod or D. player.
EN18-21_KD-G425[U_UH]f.indd 20EN18-21_KD-G425[U_UH]f.indd 20 11/22/05 9:24:14 AM11/22/05 9:24:14 AM