Filter
Top Products
3
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious
damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1 Connect the colored leads of the power cord in the order specified in the illustration below.
2 Connect the antenna cord.
3 Finally connect the wiring harness to the unit.
Purple
ാи
Purple with black stripe
ാиઘЉ෨иঙ
Green
ႋи
Green with black stripe
ႋиઘЉ෨иঙ
Gray
Ни
Gray with black stripe
НиઘЉ෨иঙ
White
Ύи
White with black stripe
ΎиઘЉ෨иঙ
ENGLISH ˁ̂
ોሉۯ!̥அᐓފԆԾ˖ڄለཔéʿᇧڄለࠓʹጅᘷࡌ๑ᖢé
ྐʍለڄ˺ለ֜ԾԽڄ˺ለϚᖄиʕ̈́Љʿψé
1 ՜ຖʓ࿌Ε˃ЎҺྐለڄᖄиለé
2 અ˭ለڄྐለ৹գé
3 ఛ݈çӕለӧڄᏃϚʹጅʕé
Typical connections / նܔڅોሉ̅٘
A
ELECTRICAL CONNECTIONS
ྑཕો
To the automatic antenna if any (250 mA max.)
вбੂ˭ለࠜЉ༫ఛʨ250 mA
To the remote lead of other equipment (200 mA max.)
в͏ɾށᄭڄჲለఛʨ200 mA
To metallic body or chassis of the car
вہᚙᝂԆԾנᇟ
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
вۘᎳീవ˔˖ڄۈᚙၷʪçۘᎳീవ˔ؠԾ༫ྐЖߟ
·ؠअཔᓭ̑ළᘕݔ׆12 V
To an accessory terminal in the fuse block
вۘᎳീవ˔˖ڄۈᚙၷʪ
Right speaker (rear)
͆ಙᑵ݈
Left speaker (rear)
ͣಙᑵ݈
Right speaker (front)
͆ಙᑵۮ
Left speaker (front)
ͣಙᑵۮ
*
2
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
*
2
ʹጅ͵ϯ༫इçනмʳѕٶٜᐓފ˃ۮç
ͫෝӕለʕçѴ۱ʿළ૧ྐé
15 A fuse
15 AۘᎳീ
Line out (see diagram
)
᎔̳ၷʪኌ࿌ڷ
Antenna terminal
˭ለၷʪ
Rear ground
terminal
ʹጅ݈ࠌϙၷʪ
*
1
Not supplied for this unit.
*
1
ʿᎲʹጅಏաé
Ignition switch
ᓭ̑ළᘕ
Fuse block
ۘᎳീవ˔
Black
෨и
Blue with white stripe
ᕇиઘЉΎиঙ
Red
߹и
Yellow
*
2
෦и*
2
Blue
ᕇи
To external components (see diagram
)
в͙இάኌ࿌ڷ
KD-G425-010A.indd 3KD-G425-010A.indd 3 24/11/05 2:57:28 PM24/11/05 2:57:28 PM