JVC KD-G320 CD Player User Manual


 
ENGLISH
17
Disc operations
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does
not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
not be recommended.
General
This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA formats.
When a disc has been loaded, selecting
“DISC” for the playback source starts disc
play.
Inserting a disc
When a disc is inserted upside down, the disc
automatically ejects.
Do not insert 8 cm discs (single CD) and
unusual shape discs (heart, flower, etc.) into
the loading slot.
Playing a disc
While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
Playing a CD-R or CD-RW
Use only “finalized” CD-Rs or CD-RWs.
This unit can play back only files of the same
type which are first detected if a disc includes
both audio CD (CD-DA) files and MP3/
WMA files.
This unit can play back multi-session discs;
however, unclosed sessions will be skipped
while playing.
Some CD-Rs or CD-RWs may not play
back on this unit because of their disc
characteristics, or for the following reasons:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the unit is dirty.
To be continued...
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
unit may reject the disc.
To remove these rough spots, rub the edges with
a pencil or ball-point pen, etc.
More about this unit
Basic operations
Turning on the power
By pressing SRC on the unit, you can also turn
on the power. If the source is ready, playback
also starts.
Turning off the power
If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Tuner operations
Storing stations in memory
During SSM search...
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
When storing a station manually, the
previously preset station is erased when a new
station is stored in the same preset number.
Warped disc
Sticker
Sticker residue
Stick-on label
Do not use the following discs:
EN12-17_KD-G425[U_UH]f.indd 17EN12-17_KD-G425[U_UH]f.indd 17 11/15/05 4:44:13 PM11/15/05 4:44:13 PM