Filter
Top Products
37
English
Operating other manufacturers’ equipment
Manufacturer Codes
JVC 01*
AKAI 02
BELL+HOWELL 03
CENTURION 04
CORONAD 05
DAEWOO 06 – 08
EMERSON 09 – 13
FISHER 14
GE•PANA 15, 16
GE•RCA 17
GOLD STAR 18, 19
HITACHI 20, 21
KTV 22, 23
MAGNAVOX 24
MARANTZ 25
MITSUBISHI 25
PANASONIC 26, 27
PHILIPS 24
PIONEER 28
PROSCAN 29
QUASAR 30
RADIOSHACK 31
RCA 02, 17, 32 – 35
SAMSUNG 36, 37
SANYO 14
SEARS 38
SHARP 39
SONY 40
SYMPHONIC 41, 42
TOSHIBA 38
ZENITH 43, 44
* Initial setting
Manufacturers’ codes for TV
Manufacturers’ codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
❏ Changing the transmittable signals for operating a
TV
1
Press and hold TV .
2
Press TV.
3
Enter the manufacturer’s code using buttons 1 – 9,
and 0.
4
Release TV .
Now, you can perform the following operations on the TV.
TV : Turn on or off the TV.
TV VOL +/–: Adjust the volume.
TV/VIDEO: Change the input mode (either TV or
VIDEO).
After pressing TV (source selecting button), you can perform
the following operations on the TV.
CHANNEL +/–: Change the channel numbers.
1 – 9, 0: Select the channel numbers.
5
Try to operate your TV by pressing TV .
When your TV turns on or off, you have entered the correct
code.
If more than one codes are listed for your brand of TV, try
each one until the correct one is entered.
EN.32-37.RX-ES1SL[C]f 03.4.8, 0:20 PM37