Filter
Top Products
35
English
By changing the transmittable signals, you can use the
remote control supplied for this unit to operate other
manufacturers’ equipment.
• Refer also to the manuals supplied with the other products.
• To operate those components with the remote control, first you
need to set the manufacturers’ codes each for the CATV
converter, DBS tuner, VCR, and TV.
• After replacing batteries of the remote control, set the
manufacturers’ codes again.
Set the mode selector to AUDIO/TV/VCR/DBS.
Manufacturer Codes
ECHOSTAR 40
G.I. 41
HITACHI 42
HUGHES 43
PANASONIC 44
PRIMESTAR 45
RCA 46
SONY 47
TOSHIBA 48
Manufacturers’ codes for DBS tuner
Operating other manufacturers’ equipment
❏ Changing the transmittable signals for operating a
CATV converter or DBS tuner
1
Press and hold DBS .
2
Press DBS.
3
Enter the manufacturer’s code using buttons 1 – 9,
and 0.
4
Release DBS .
Now, you can perform the following operations on the CATV
converter or DBS tuner.
DBS : Turn on or off the CATV converter or
DBS tuner.
After pressing DBS (source selecting button), you can perform
the following operations on the CATV converter or DBS tuner.
CHANNEL +/–: Change the channel numbers on the
CATV converter or DBS tuner.
1 – 9, 0: Select the channel numbers on the
CATV converter or DBS tuner.
5
Try to operate your CATV converter or DBS
tuner by pressing DBS .
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If more than one codes are listed for your brand of the CATV
converter, try each one until the correct one is entered.
OPEN/CLOSE
DVD VCR DBS TV
DVD VCR DBS TV
DVD MULTI
TV VOL CHANNEL
TUNING TUNING
DVD
AUDIO/TV
/VCR/DBS
FM MODE
MEMORY
TOP MENU
CHOICE
AUDIO
ZOOM
ANGLE
REPEAT
DIMMER
SUBWFR CENTER L RSURR
BASS BOOST
A.POSITION
SMART S. SETUP
SLEEP CANCEL
SURROUND
ANALOG/DIGITAL
TV RETURN
BASS TREBLE
SUBTITLE RETURN
TITLE/GROUP
ON
SCREEN
MENU
VOLUME
FM/AM TV/VIDEO MUTING
AUDIO
HOME THEATER RECEIVER
BASS TREBLE
100
+
PROGRESSIVE
123
4
VFP
INPUT
TONE
TEST EFFECT
DECODE
56
789
10
3D
0 +10
ENTER
Manufacturer Codes
G.I. 01*
GEMINI 02
HAMLIN 03 – 06
JERROLD 07 – 15
MACOM 16 – 18
MAGNAVOX 19
OAK 20 – 22
PANASONIC 23, 24
PHILIPS 25 – 30
PIONEER 31, 32
S. ATLANA 33, 34, 35
SAMSUNG 36
TOCOM 37
ZENITH 38, 39
Manufacturers’ codes for CATV converter
*Initial setting
Manufacturers’ codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
CONTINUED ON THE NEXT PAGE
EN.32-37.RX-ES1SL[C]f 03.4.9, 3:31 PM35