Filter
Top Products
36
English
Manufacturer Codes
JVC 01* – 04
AIWA 05
AKAI 06 – 08
BELL+HOWELL 09
DAEWOO 10
EMERSON 11 – 15
FISHER 16 – 19
G.E. 20, 21
GO VIDEO 22
GOLD STAR 23
GO-VIDEO A 24
GO-VIDEO B 25
HITACHI 20, 26
MAGNAVOX 27 – 29
MITSUBISHI 30 – 33
NEC 34, 35
PANASONIC 36, 37
PHILIPS 27
RCA 38
SAMSUNG 39 – 41
SANYO 16 – 19
SCOTT 42
SHARP 43, 44
SHINTOM 45
SONY 46 – 51
SYMPHO 52
TEKNICA 53, 54
TOSHIBA 55
ZENITH 56
* Initial setting
Manufacturers’ codes for VCR
❏ Changing the transmittable signals for operating a
VCR
1
Press and hold VCR .
2
Press VCR.
3
Enter the manufacturer’s code using buttons 1 – 9,
and 0.
4
Release VCR .
Now, you can perform the following operations on the VCR.
VCR : Turn on or off the VCR.
After pressing VCR (source selecting button), you can perform
the following operations on the VCR.
CHANNEL +/–: Change the channel numbers on the
VCR.
1 – 9, 0: Select the channel numbers on the
VCR.
3: Start playback.
7: Stop playback.
8: Pause playback. To release it, press
3.
¡: Fast-wind a tape.
1: Rewind a tape.
5
Try to operate your VCR by pressing VCR .
When your VCR turns on or off, you have entered the
correct code.
If more than one codes are listed for your brand of VCR, try
each one until the correct one is entered.
Operating other manufacturers’ equipment
EN.32-37.RX-ES1SL[C]f 03.4.8, 0:20 PM36