Filter
Top Products
18
Basic operations/Listening to radio
This receiver can receive FM and AM radio
broadcasts.
1 Slide the remote control
mode selector to
RECEIVER.
2 Press FM/AM to select “FM” or
“AM”.
• Pressing FM/AM selects a radio broadcast
as the sound source.
• You can also use SOURCE SELECT on the
receiver to select a radio broadcast as the
sound source.
• Each time you press FM/AM, the band will
toggle between “FM” and “AM”.
Example:
Display on the receiver
3
Press TUNING or TUNING
repeatedly to select a radio
station (frequency).
• When the receiver has received an FM
stereo broadcast, “ST” (stereo) indicator
lights up.
• You can also select a radio station using the
automatic tuning.
Automatic tuning:
Hold down TUNING or TUNING until the
frequency starts changing, and then release
the button.
When the receiver has received a broadcast,
the frequency automatically stops changing.
To quit the function while searching for a
broadcast, press TUNING or TUNING .
NOTE
•Pressing SEARCH – or SEARCH + on the receiver
also enables you to select the radio station.
• If an FM stereo broadcast is difficult to hear because
of noise, you may be able to hear the broadcast
more easily by pressing FM MODE to switch the
sound to monaural reception. In this case, “MONO”
lights up. To return the sound to stereo reception,
press FM MODE again.
Presetting radio stations in the receiver allows you
to easily tune in to a radio station.
Presetting radio stations
You can store up to 30 FM radio stations and up to
15 AM radio stations.
1 Select a radio station you want
to store (A “Selecting a radio
station”).
2 Press MEMORY.
•
The p
reset number flashes in the display
window on the recei
ver for about 5 seconds.
Selecting a radio station
Number
buttons
MEMORY
FM/AM
FM MODE
DISPLAY
(Radio Data
System)
TA/News/
Info
PTY +/–
SEARCH
Frequency
Tuning in to a preset
radio station
(Continued on the next page)
Listening to radio broadcasts
Remote control
mode selector
TUNING
//
PRESET
//
ENTER
Listening to radio
EXA10[B].book Page 18 Thursday, August 4, 2005 10:01 PM