Filter
Top Products
12
Connecting up Connection
English
CAUTION
Connect the main unit directly with a TV (or a
monitor) without routing through a VCR.
Otherwise it may cause picture distortion while
playing.
Also, when connecting the main unit to a TV with
a VCR built in, there may be picture distortion
while playing.
NOTE
Please check that the setting for VIDEO OUT SELECT
(PAL / NTSC) on the rear panel of the main unit and
the color system on your TV set are the same.
(
A
page 5)
You can enjoy pictures of better quality using the
following cord instead of the supplied video cord.
Connecting by using the S-Video cord
Connecting by using the component video
cord
You can enjoy better quality pictures than when
using the S-Video cord.
CAUTION
Use one of either the S-Video cord or the
component video cord. If both cords are used,
pictures may not be played properly.
NOTE
• In order to enjoy pictures with Progressive mode
(
A
page 27), the TV is required to have Progressive
video input.
• If the component video input jacks of your TV are
BNC type, use a plug adapter (not supplied) to
convert the plugs.
• Connect the power cord after all other
connections are complete.
• The STANDBY lamp (on the front panel) will be
lit.
Connecting with TV
When a clearer picture is
desired
TV
Supplied composite video cord
Main unit
Main unit
Connecting directly
TV (or
monitor)
TV
Main unit
S-Video cord
(sold separately)
Connecting the power cord
Component video cord
(sold separately)
Main unit
AC outlet
Supplied power cord
Main unit
Getting started
EXA1[UW].book Page 12 Thursday, January 8, 2004 10:09 AM